Pioneer DEH-10MP Other Functions, Adjusting initial settings, Switching the auxiliary setting

Section

02Operating this unit

3Press a or b to adjust the source vo- lume.

SLA +4 to SLA –4 is displayed as the source

volume is increased or decreased.

# To return to the normal display, press BAND.

Other Functions

Adjusting initial settings

!Even when the sources are off, the clock display appears on the display.

%Press CLOCK to turn the clock display on or off.

Each press of CLOCK turns the clock display

on or off.

# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Press SOURCE and hold until the unit turns off.

2Press SOURCE and hold until function name appears in the display.

3Press FUNCTION to select one of the in- itial settings.

Press FUNCTION repeatedly to switch be- tween the following settings: Clock—AUX (auxiliary input)

Use the following instructions to operate each particular setting.

#To cancel initial settings, press BAND.

#You can also cancel initial settings by holding down SOURCE until the unit turns off.

Switching the auxiliary setting

It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit.

1Press FUNCTION to select AUX.

2Press a or b to turn the auxiliary set- ting on or off.

Setting the clock

Use these instructions to set the clock.

1Press FUNCTION to select clock.

2Press c or d to select the segment of the clock display you wish to set.

Pressing c or d will select one segment of the clock display:

Hour—Minute

3Press a or b to set the clock.

Turning the clock display on or off

You can turn the clock display on or off.

12 En