High Performance LCD Monitors | Navigating the Monitor en 37 |
|
|
NOTICE! When key lock is enabled through the front panel, use either the remote control or the front panel buttons to disable
i the key lock command. To disable the key lock feature using the front panel buttons, press and hold both the Input and the Menu buttons until the monitor displays the Key Unlocked message.
5.7.1Configuring Alarm Relay Inputs
The monitor allows you to connect an alarm relay cable from a device (camera or door) to the monitor, and then to configure the monitor’s response to an incoming alarm (see
Section 4.7 Connecting an Alarm Trigger, Page 25).
| Trigger |
|
|
|
|
| ||
|
|
|
| Trigger Enable | Off |
|
| |
|
|
|
| Trigger Type | External |
|
| |
|
|
|
| Trigger Input | AV1 |
|
| |
|
|
|
| Buzzer | On |
|
| |
|
|
|
| Trigger Time | 20 |
|
| |
|
|
|
| Trigger Option | N/O |
|
| |
|
|
|
| Display Type | PIP & FULL |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| :Move |
| :Input | :Menu |
|
|
| Table 5.7 Trigger Menu |
|
|
| ||||
|
|
|
|
|
|
| ||
Option |
| Definition |
|
|
| Selections | ||
|
|
|
|
| ||||
Trigger Enable |
| Activates the trigger feature. |
| ON or OFF | ||||
|
|
|
| |||||
Trigger Type |
| Specifies the source of the alarm. This option is | External | |||||
|
| always set to External. |
|
|
| |||
|
|
|
|
|
|
|
|
|
Bosch Security Systems, Inc. | Installation Manual | F.01U.076.723 3.0 2009.03 |