26 en Installing the Monitor | High Performance LCD Monitors |
|
|
2.Configure the following settings for the Dinion camera:
–VMD: OSD
–Area: 1
–Active: On
3.Connect one flying lead to relay output three, on the back of the Dinion camera, and connect the other to relay output four.
4.Connect the other end of the Trigger Relay cable to the Trigger Input connector on the back of the monitor.
5.Plug the monitor into a power socket; then press the Power button.
6.On the monitor, access the Trigger menu:
a.Press the Menu button.
b.Press the Down Arrow button to access the Setup menu.
c.Press the Right Arrow button to enter the Setup menu.
d.Press the Down Arrow button until Trigger is highlighted; then press the Right Arrow button.
7.Make the necessary changes to the Trigger menu so that the settings match the following:
Trigger |
|
|
| Trigger Enable | On |
| Trigger Type | External |
| Trigger Input | AV1 |
| Buzzer | On |
| Trigger Time | 10 |
| Trigger Option | N/O |
| Display Type | M/C |
:Move | :Input | :Menu |
8.Press the Menu button three (3) times to exit the menu and to return to the video display.
F.01U.076.723 3.0 2009.03 | Installation Manual | Bosch Security Systems, Inc. |