Bosch Appliances VIP X1600 M4S manual Configuring the Module, Reboot, Additional Parameters

22 en Installation VIP X1600 M4S

Configuring the Module

You can start the Configuration Manager immediately after installation.

1.Double-click the icon on the desktop or start the program via the Start menu. After the program has started, the network is immediately searched for compatible video servers.

2.You can start the configuration if the module is shown in the list in the left section of the window. To do this, right-click the entry for the module.

3.Click Unit network settings... in the popup menu.

4.In the Unit IP address field, enter a valid IP address for your network (for example 192.168.0.17) and click OK. The unit reboots and the IP address is valid.

5.If required, enter an appropriate subnet mask for the IP address, and additional network data.

i	NOTICE!
	You must reboot to activate the new IP address, a new subnet mask or a gateway IP address.

Reboot

You can trigger the reboot directly with the assistance of the Configuration Manager.

XRight click the entry for the module in the list in the left section of the window and select the Reset command.

Additional Parameters

You can check and set additional parameters with the assistance of the Configuration Manager. You can find detailed information on this in the documentation for this program.

DOC V4.0 2009.06 Installation and Operating Manual Bosch Security Systems