VIP X1600 M4S | Operation en 93 |
|
|
System Log / Event Log
The System Log field contains information about the operating status of the module and the connection. You can save these messages automatically in a file (see Section 5.15 Advanced Mode: LIVEPAGE Functions, page 40).
Events such as the triggering or end of alarms are shown in the Event Log field. You can save these messages automatically in a file (see Section 5.15 Advanced Mode: LIVEPAGE Functions, page 40).
1.If you want to delete the entries, click the delete icon in the top
2.If you want to view a detailed log, click the icon in the top
Audio Function (Audio Version Only)
Depending on the configuration, the module can send and receive audio signals. All users who are connected by browsers receive the audio signals sent by the module.
| i | NOTICE! |
| It is not possible to send audio signals to the module. | |
|
| |
|
|
|
6.3 |
| Saving Snapshots |
You can save individual images from the video sequence currently shown on the LIVEPAGE in JPEG format on your computer's hard drive. The icon for recording single images is only visible if the unit is configured to enable this process (see Section Allow snapshots, page 41). You can save snapshots from each of the four cameras in the Quad View. The icons below the camera images apply to the four camera images in the following sequence: top left, top right, bottom left, bottom right.
XClick the icon. The image is saved at a resolution of 704 × 576 pixels (4CIF). The storage location depends on the configuration of the module (see Section Path for JPEG and MPEG files, page 41).
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |
