VIP X1600 M4SAppendix en 107
8.5Processor Load
If the VIP X1600 M4S encoder module is accessed via the Web browser, you will see both of the processor load indicators in the top left of the window next to the manufacturer's logo.
| Moving the mouse cursor over the graphic indicator displays the status of the processor |
| together with the numerical values. This information may help you with troubleshooting or |
| fine tuning the unit. |
8.6 | Network Connection |
You can display information about the network connection. To do this, move the cursor over the i icon.
Link | Ethernet link type |
UL | Uplink, speed of the outgoing data traffic |
DL | Downlink, speed of the incoming data traffic |
8.7 | Serial interface |
| Options for using the serial interface include transferring transparent data, controlling |
| connected units or operating the unit with a terminal program. |
| The serial interface supports the |
| used depends on the current configuration (see Section 5.36 Advanced Mode: COM1, page 72). |
| Connection is via the terminal block. |
8.8 | Terminal Block | |
| The terminal block has several contacts for: | |
| – | 4 alarm inputs |
| – | 4 relay outputs |
| – | Serial data transmission |
Pin Assignment
The pin assignment of the serial interface depends on the interface mode used (see
Section 5.36 Advanced Mode: COM1, page 72).
Contact | RS232 mode | RS422 mode | RS485 mode |
|
|
|
|
CTS | CTS (clear to send) | RxD- (receive data minus) | Data- |
|
|
|
|
TXD | TxD (transmit data) | TxD- (transmit data minus) |
|
|
|
|
|
RXD | RxD (receive data) | RxD+ (receive data plus) | Data+ |
|
|
|
|
RTS | RTS (ready to send) | TxD+ (transmit data plus) |
|
|
|
|
|
GND | GND (ground) | — | — |
|
|
|
|
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |
