92 en Operation | VIP X1600 M4S |
|
|
Image Selection
You can view the image from each camera separately on a full screen. Alternatively, you can display the camera images from all four video inputs together (Quad View).
1.Click one of the tabs above the video image to view one or all of the camera images.
2.Click one of the tabs Stream 1, Stream 2 or
View Control
The options for controlling peripheral devices (for example a pan/tilt camera head or a dome camera) are dependent on the unit type installed and on the configuration of the module.
If a controllable unit is configured and connected to the module, the controls for the peripheral are displayed to the left of the video image.
1.To control a peripheral, click the appropriate controls.
2.Move the mouse cursor over the video image. Additional options for controlling peripherals are displayed with the mouse cursor.
Digital I/O
The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's configuration determines whether the alarm is displayed, as well as additional details (see Section 5.15 Advanced Mode: LIVEPAGE Functions, page 40).
Triggering Relay
You can switch connected units using the relays in the module (for example lights or door openers).
XTo activate this, click the icon for the corresponding relay next to the video image. The icon will be red when the relay is activated.
DOC V4.0 2009.06 | Installation and Operating Manual | Bosch Security Systems |
