Bosch Appliances UML-202-90, UML-172-90, UML-192-90 installation manual Video, Component

38 en Navigating the Monitor			High Performance LCD Monitors
Option	Definition			Selections
Trigger Input	Select the video input source that the monitor			AV1
	displays when an alarm is activated. When the			AV2
	monitor receives an alarm input, it switches to the			S-Video
	speficied input source.			Component
				HDMI
				DVI
				PC
Buzzer	Activates an audible signal when the monitor			ON or OFF
	receives an alarm input and switches to the Trigger
	Input video source.
	Note: If the Input video source is the same as the
	Trigger Input, the monitor does not sound the
	buzzer.
Trigger Time	Select the amount of time, in seconds, that the			0–100seconds
	monitor displays the Trigger Input video source.
Trigger Option	Select the type of physical trigger input. Consult the			N/C
	manual for the alarm source to determine your			(normally closed)
	selection.			N/O
				(normally open)
				High (2–5 V)
				Low (< .6 V)
Display Type	Select the mode in which the monitor displays the			PIP & FULL
	Trigger Input. The monitor takes one of the following			FULL
	actions:
	–	Displays the Trigger Input in the Picture-in-
		Picture position (PIP & FULL) of the current
		video input source.
		Note: The main video source must support the
		Trigger Input source as a PIP option. See
		Section 5.6 PIP Menu, Page 35.
	–	Switches the display to show the Trigger Input
		in the full screen (FULL).

F.01U.076.723 3.0 2009.03 Installation Manual Bosch Security Systems, Inc.