Clarion VRX935VD DSF mode, P.EQ mode, DSF effect ON/OFF, Selecting the DSF type, English, Signal

English

5.1 ch Surround Decoder Operations

DSF mode	●SIGNAL
	∗ The factory default setting is “P.NOISE”.

Owner’s manual

DSF effect ON/OFF

∗The factory default setting is “OFF”. 1. Press the [A-M] button.

2. Touch the [STATUS] key.

3. Touch the [DSF] key to select “on” and “off”.

4.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.

5.After the setting, press the [A-M] button again or touch the [RTN] key to return to the STANDARD screen.

Note:

•If the DSF effect is set to OFF, the adjustment made in “DSF” is not reflected in the music source.

This function selects [P. NOISE] or [MUSIC].

●SPEAKER SELECT

∗The factory default setting is “FRONT”.

This function selects [FRONT], [CENTER] or [SURROUND].

●“BAND”

∗The factory default setting is “BAND1”.

Select the channel to be compensated (BAND1, BAND2, BAND3).

●“FREQUENCY”

∗The factory default setting is “1 kHz”.

Select the center frequency that you want to compensate from the range of 20 Hz to 20 kHz. (1/3 octave step, 31 points)

Selecting the DSF type

1.Press the [A-M] button and touch the [DSF] key.

2.Touch the key for the desirable type to select it.

3.When the setting is finished, touch the [RTN] key or press the [A-M] button to return to the previous mode.

P.EQ mode

P.EQ effect ON/OFF

∗The factory default setting is “OFF”. 1. Press the [A-M] button.

●“Q”

∗The factory default setting is “1”.

Set the sharpness of the Q-curve to one of the parameters: 1, 3, 5, 7 and 20.

●“GAIN”

∗The factory default setting is “0”.

Adjust the gain (output level) in the range of - 12 dB to +12 dB. (1 dB step, 25 points)

4.After making adjustments to a desired pat- tern by repeating the operations of item3, touch the [RNT] key or press the [A-M]but- ton to return to the previous mode.

2.Touch the [STATUS] key.

3.Touch the [P.EQ] key to select “on” and “off”.

4.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.

5.After the setting, press the [A-M] button again or touch the [RTN] key to return to the STANDARD screen.

Note:

•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ” is not reflected in the music source.

Selecting the Dolby PLII (Dolby Pro Logic II) type

1.Press the [A-M] button and touch the [Dolby PLII] key.

2.Touch the key for the desirable type to select it.

3.When the setting is finished, touch the [RTN] key or press the [A-M] button to return to the previous mode.

∗ The factory default is “off”.

Setting and storing P.EQ Properties

1.Press the [A-M] button to show the AUDIO MODE menu.

2.Touch the [P.EQ] key to show the P.EQ ad- justing display.

3.Touch the key for the desirable type to select it.

The P.EQ adjustment contents are as fol- lows:

60 VRX935VD