Clarion VRX935VD ch Surround Decoder Operations, English, Speaker Gain, Delay, Center Sp, Dolby D

5.1 ch Surround Decoder Operations

●SPEAKER GAIN

This function sets speaker output level.

∗This function is not available for speakers whose SPEAKER SEL setting is set to OFF.

3-1. Touch the [SPEAKER GAIN] key to show the submenu.

3-2. Touch the [FRONT L], [CENTER], [FRONT R], [SURROUND R], [SURROUND L] or [SUB WOOFER] key to set respective item.

3-3. Touch the[w] or [z] key to make adjust- ments in the range -10 dB to +10 dB in 1 dB step increments. The default value is “0 dB”.

●DELAY

This function adjusts the timing of the speakers so that they are synchronized with front speaker output.

∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.

3-1. Touch the [DELAY] key to show the submenu.

3-2. Touch the [CENTER SP] or [SURROUND SP] key to set respective item.

3-3. Touch the [w] or [z] key to adjust.

[CENTER SP]:

Adjustments are made in the range 0 ms to

5ms. The default value is “0 ms”. [SURROUND SP]:

Adjustments are made in the range 0 ms to 15 ms. The default value is “0 ms”.

●DOLBY D

This function sets the dynamic range compres- sion.

∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.

3-1. Touch the [DOLBY D] key to show the submenu.

3-2. Touch the [MAX], [STD] or [MIN] key to se- lect respective item.

∗The default value is [MAX].

4.When all settings are completed, press the

[ADJ] button or touch the [RTN] key to return to the previous mode.

Output adjustment of subwoofer volume, center volume and balance/fader

1.Press the [A-M] button and touch the [DETAIL] key.

2.To make an adjustment on :

●Subwoofer volume adjustment

2-1. Touch the [SUBWOOFER VOL] key, then touch the [w] or [z] key to adjust to desir- able level.

∗The factory default setting is “0”. (Setting range : -6 to 3)

●Center volume adjustment

2-1. Touch the [CENTER VOL] key, then touch the [w] or [z] key to adjust to desirable level.

∗The factory default is “0”. (Setting range : -6 to 0)

●Balance/Fader adjustment

2-1. Touch the [BAL/FAD] key.

Touch the [w] or [z] key to adjust the bal- ance level.

[w] key : emphasized the sound from the front speakers.

[z] key : emphasized the sound from the rear speakers.

2-2. Touch the [Å] or [Î] key to adjust the fader level.

[Å] key : emphasized the sound from the left speakers.

[Î] key : emphasized the sound from the right speakers.

3.When the adjustment is complete, touch the [RTN] key or press the [A-M] button to return to the STANDARD screen.

English

Owner’s manual

VRX935VD 59