VM9423
CONTROLS AND INDICATORS
Button Operation
1. OPEN
Press to activate the automatic mechanical system and slide the TFT monitor down to reveal the disc and SD slots. Press again to close the TFT.
Press and hold to activate the "Tilt" function. While the Tilt icon is flashing, use the up/down joystick buttons to move the TFT into the desired position. Press and hold to exit the function or wait ten seconds for it to time out.
2. DISP
When viewing files in DVD/disc mode, press to view the top and bottom information bars. Press again to select "Display Off".
In DVD Mode, press to view the top and bottom information bars. Press again to turn “Display Off”.
3. PIC
Press to view and adjust Brightness and Contrast settings.
4. BAND
Press the BAND button to change the AM, FM or SAT band.
5. AUDIO
Rotate to adjust the volume. Press to access audio EQ menu.
6. SRC
Press to select playing mode.
When you change the source during navigation, the voice prompts will still be heard, although the navigation map cannot be seen. (The selected source audio will be muted until the navigation voice prompt command is completed, after which the source audio will resume.)
7.DISC SLOT
8.MUTE
Press to silence the receiver. Press again to resume previous volume level.
NOTE: This head unit features Softmute, which will allow the volume to increase gradually when the MUTE function is deactivated.
9. IR Remote Control Receiver
3