Jensen VM9511TS instruction manual Installation

Page 9

VM9511TS

INSTALLATION

Pre-installation

1.Press the metal levers on both sides to remove the half- sleeve from the radio.

2.Remove the transport screws.

PREPARE RADIO

3.Install the half-sleeve.

a.Install adapter if necessary (optional).

b.Install half-sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.

c.Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

d.Install support strap to make the unit more stable.

INSTALL HALF SLEEVE

3d

3c

3a

3b

CAUTION! Be careful not to damage the car wiring.

4.Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.

Wiring

Complete wiring as illustrated in the wiring diagram on page

3.Once the wiring is complete, reconnect the battery negative terminal. If there is no ACC available, connect the ACC lead to the power supply with a switch.

NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The VM9511TS uses one 15 amp mini-ATM fuse, located in the black filter box in-line with the main wire harness.

Final Installation

After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on). If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

1.Connect wiring adapter to existing wiring harness.

2.Connect antenna lead.

3.Carefully slide the radio into the half-sleeve, making sure it is right-side-up, until it is fully seated and the spring clips lock it into place.

NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make sure the unit is mounted within this limitation.

4.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

5.Replace any items you removed from the dashboard.

FINAL INSTALLATION

Final ISO-DIN Installation

1.Remove trim ring.

2.Mount factory brackets on new radio using existing screws from old radio.

3.Slide radio chassis into dash opening and secure.

4.Reinstall dash panel.

FINAL ISO-DIN INSTALLATION

Using the iAUX3 External AV Connector

The iAUX3 (sold separately) allows you to connect a variety of external devices, including a VCR, DVD player, portable MP3 player, etc., to your VM9511TS without removing the radio.

To install the iAUX3, connect it to the AUX-IN cables on the back of the VM9511TS (see the Wiring Diagram on page 3),

and then install the iAUX3 in a location convenient for plugging in auxiliary devices.

5

Image 9
Contents VM9511TS Page Contents ContenidoTable DES Matières Page Features PreparationTools and Supplies IAUX3 Ready Sold Separately Disconnecting the BatteryWiring Diagram Wiring Diagram Multimedia Connections Installation Controls and Indicators Button OperationAudio 11 /RPT 10 /SCN12 /2-6CH/RDM 13 /STOPLCD Display/Indicators Front Zone Remote Control Function Front Zone Remote Control FunctionsRef# DVD VCD Tuner CD/MP3Function Name Ref# MULTI-ZONE Remote Control Multi-Zone Remote Control Functions Button Name Ref #DVD VCD Using the TFT Monitor Monitor Protective Measures Monitor Movement MechanismOperating Instructions General Setup Menu System Setup MenuExiting the System Setup Menu ASP Audio Sound Processing Config MenuReturning to the System Setup Menu Accessing the ASP Config MenuSelecting a Source for the Front Zone MULTI-ZONE OperationSelecting a Source for the Rear Zone Multi-ZONE Source OptionsTuner Operation Channel/Category Guide Mode Preset ModeXM Radio Operation Displaying the Identification ID CodeXM Setup Menu Direct TuningCategory Guide Mode Diagnostic ModeDVD/VCD Video Operation Scanning Fast Forward/Fast ReverseSelecting 2-Channel and 6-Channel Audio Playback Goto SearchGeneral Disc Information Symbol MeaningVCD Playback Information Disc Properties Symbo 12cm Disc Properties Max PlayAccessing the DVD Setup Screen DVD/DISC Setup MenuAccessing a Menu Language MenuSPK Config Menu Audio MenuSurround Sound Pro-Logic II Menu Features Setting Options Function Rating Menu Features Setting Options FunctionRating Parental Lock Menu DVD/DISC Audio Operation CD Player User InterfaceMP3/WMA Operation VM9511TS SD Card Reader Operation Accessing SD Card ModeChange Directory Previous/NextAccessing iPod Mode Ipod OperationControlling your iPod TV Tuner Operation Navigation System Troubleshooting TroubleshootingProblem Cause Corrective Action Error Messages Error MessagesMessage Displayed Cause Corrective Action Care and Maintenance Specifications Month Limited WarrantyCEA Power Ratings VM9511TS Preparación CaracterísticasHerramientas y Provisiones Desconexión de la Batería Digrama Cableado Digrama Cableado Módulo DE LOS Medios Instalación Botones de Operación Controles E IndicadoresRanura para Tarjeta SD Pantalla LCD/Indicadores Indicador de Volumen LoudPantalla Principal Pantalla de Canal/DiscoControl Remoto DE Zona Delantera Función Tabla 1 Funciones de Control Remoto de Zona DelanteraDVD VCD Sintonizador CD/MP3 ReferenciaOFF Close TFTNcia Control Remoto DE MULTI-ZONEUtilización DEL Monitor TFT Tabla 4 Medidas de Protección del Monitor Mecanismo de Movimiento de MonitorInstrucciones DE Operación Enmudecedor de Línea Reinicio del SistemaMenú de Configuración General Menú DE Configuración DE SistemaAccediendo al Menú de Configuración General Seleccionando una Función para AjusteRegresar al Menú de Configuración de Sistema Saliendo del Menú de Configuración de SistemaAccediendo al Menú de Configuración de ASP Calibración de la PantallaSeleccionando una Fuente para la Zona Delantera Operación MULTI-ZONESeleccionando una Fuente para la Zona Trasera Tabla 9 Opciones de Fuente Multi-ZONE Fuente de ZonaOperación DEL Radio Operación DE Radio XM Sintonía Directa Menú de Configuración de XMModo de Guía de Categoría Modo de DiagnósticoOperación DEL Video DE DVD/VCD Avance Rápido/Retroceso Rápido Moviéndose a Través de CapítulosEscaneo Ir a Búsqueda gotoInformación de Disco General Información de ReproducciónInformación de Reproducción de DVD Propiedades del DiscoPantalla de Configuración de DVD Menú Configuración DEL DVD/DISCMenú Language Lenguaje Menú VideoMenú de Audio Menú de SPK ConfigSonido Envolvente Surround Selección de AltavocesTabla 17 Funciones de Menú Pro-Logic Menú Rating Bloqueo de PadresFunciones de Menú Rating PG-RInterfaz Utilizador del Lector de SD Operación DEL Audio DE DVD/DISCOControlando la Reproducción Operación MP3/WMAReproduciendo Archivos MP3/WMA Accediendo al Modo de Tarjeta SD Operación DEL Lector DE Tarjeta SDUsando los Controles Táctiles de Pantalla Touch Screen Cambio de DirectorioOperación DE Ipod Al Modo del iPod del AccesoControlar su iPod Accediendo al Modo TV Operación DEL Sintonizador DE TVAlmacenando Estaciones AS Selección Directa de CanalSistema DE Navegación Tabla 19 Troubleshooting Problema Causa Acción Correctiva Solución DE ProblemasTabla 19 Troubleshooting Mensajes de ErrorProblema Causa Acción Correctiva Tabla 20 Mensajes de ErrorsCuidado y Mantenimiento Calificación de Energía CEA EspecificacionesOutils et fournitures FonctionsAccessoires facultatifs Débranchez la pilePrêt pour iAUX3 vendu séparément Diagramme DE Câblage Câblage Pour Media Module Installation finale CâblageUtilisation du connecteur AV externe iAUX3 Controles ET Indicateurs Opération de boutonOuvrir Logement pour carte SD Affichage à cristaux liquides/ Indicateurs Telecomande DE LA Zone Davant Tableau 1 Fonctions de télécommande de la zone davant Fonction Nom/Ref #DVD VCD AM/FM CD/MP3 AM/FM EMA, LARGE, NormalSEL Telecommande MULTI-ZONE Utilisation DU Moniteur TFT Tableau 4 Mesures de protection du moniteur Mécanisme du mouvement du moniteurInstructions Doperation Zone darrière Réinitialisation du systèmeTableau 6 Ajustements audio à Six Chaînes Aricle Menu configuration générale Menu Configuration DU SystemeAccéder au menu configuration générale Sélection dune fonction pour ajustementMenu ASP traitement de son audio config Sortir du menu configuration du systèmeCalibrage dÉcran Operation MULTI-ZONE Sélectionner une source pour la zone davantSélectionner une source pour la zone darrière Operation Tuner AM/FM Operation Radio XM Mode Guide de Catégorie Menu configuration XMMode Diagnostique Syntonisation directeOperation Platine DVD Avance rapide/recul rapide Se déplacer à travers les chapitresBalayage Recherche Goto aller àPBC contrôle de la reproduction VCD uniquement Information de reproductionInformation générale du disque Accéder à lécran de configuration du DVD Menu DE Configuration DVD/DISQUEMenu Langue Menu VidéoMenu audio Menu SPK Config Menu de configuration quadriphoniqueQuadriphonie Tableau 15 Fonctions menu audioMenu Classement verrouille parentale Tableau 17 Fonctions Menu Pro-Logic Réglage OptionsTableau 18 Fonctions Menu Classement Réglages Options Operation Audio DVD/DISQUE Utilisation des contrôles décran CDOpération MP3/WMA Jouer des fichiers MP3/WMA Operation Lecteur Carte SD Accéder à la mode carte SDChangement de répertoire Précédente/prochaineAccéder à la mode iPod Operation IpodContrôler votre iPod Operation Tuner TV Systeme DE Navigation Depannage Tableau 19 DepannageProblème Cause Modalité de reprise Tableau 19 Depannage Problème Cause Modalité de reprise Messages derreurTableau 20 Messages derreur Message derreur Cause Modalité de repriseSoin et entretien Garantie Limitée DE 12 Mois Classement Puissance CEAVidéo

VM9511TS specifications

The Jensen VM9511TS is a cutting-edge multimedia receiver designed to enhance the in-car entertainment experience while keeping the focus on safety and functionality. One of its standout features is the 6.8-inch touchscreen display, which enables users to easily navigate through different functionalities. The screen boasts a high resolution, ensuring that videos and images are crisp and clear, allowing for an enjoyable viewing experience.

One of the main attractions of the Jensen VM9511TS is its compatibility with various media formats. The receiver supports DVDs, CDs, and a range of digital formats, meaning users can enjoy their favorite content from a variety of sources. The built-in Bluetooth connectivity is another significant feature, enabling hands-free calling and audio streaming from smartphones. This not only enhances convenience but also contributes to safer driving by allowing users to keep their hands on the wheel.

Additionally, the VM9511TS features USB and AUX inputs, providing further options for connecting external devices. Whether it's a flash drive loaded with music or a smartphone through an auxiliary cable, users can easily play their preferred media. The receiver also supports video playback through its rear-view camera input, making it an excellent choice for those looking to enhance their vehicle's safety features.

Audio quality is a key focus of the Jensen VM9511TS, which is equipped with a built-in amplifier. The unit ensures that sound is delivered with clarity and power. It also offers customizable audio settings, allowing users to adjust bass, treble, and balance to suit their preferences. The equalizer settings available provide a tailor-made listening experience, enhancing the enjoyment of any type of music.

Moreover, the Jensen VM9511TS is designed with user-friendliness in mind. Its intuitive interface simplifies navigation, and the responsive touchscreen allows for quick access to functions. The receiver also supports steering wheel controls, allowing users to keep their attention on the road while adjusting settings.

In summary, the Jensen VM9511TS is a versatile multimedia receiver that combines functionality with modern technology. Its range of features, from touchscreen navigation to audio customization, makes it a top choice for those seeking to upgrade their car's entertainment system while ensuring a safe driving environment. With its robust capabilities and user-centric design, the Jensen VM9511TS stands out in the competitive landscape of in-car receivers.