Alpine IVA-C801 owner manual Radio Operation, Manual Tuning, Automatic Seek Tuning, 11-EN

Radio Operation

(IVA-C801) (CVA-1006)

1 2 3 1 2 3

SOURCE

BAND SOURCE Rotary encoder BAND Rotary encoder

Manual Tuning

1 Press the SOURCE button after turning on the power.

The main menu screen appears.

2 Rotate the rotary encoder to scroll the bottom menu and select "RADIO," then press the rotary encoder.

The radio mode is activated and the display changes to the Radio Mode screen.

3 Press the BAND button to select the desired radio band. Each press changes the bands as follows:

→FM1 → FM2 → AM

4 Press the 2 (TUNE) button to choose the manual tuning mode. Each press changes the function modes for the buttons 1 and 3 as follows:

→ Distance → Local → Manual

g f g f ( )

5 Press the 1 (() or 3 ()) button to change the radio frequency downward or upward respectively. Each press changes the frequency by one step. When the button is pressed and held, the frequency changes continuously until the button is released.

NOTE

When a stereo FM station is tuned in, the STEREO indicator appears in the display.

Automatic Seek Tuning

1 Press the BAND button repeatedly to select the desired radio band, FM or AM.

2 Press the 2 (TUNE) button to select the desired mode, DX or Local. Each press changes as follows:

→Distance → Local → Manual

There are two modes you can select for auto tuning, DX and Local:

•DX (Distance) mode (with DX SEEK indicator ON); Both strong and weak stations will be tuned in.

•Local mode (with SEEK indicator ON);

Only strong stations will be tuned in. The initial setting is DX.

3 Press the 1 (g) or 3 (f) button to automatically seek a radio station downward or upward respectively.

When the unit finds a station, it stops. To automatically seek next station, press the same button again.

NOTE

When a stereo FM station is tuned in, the STEREO indicator appears in the display.

11-EN