Alpine IVA-C801 Adjusting Brightness of Picture, Setting Automatic Opening/ Closing of Monitor

Page 49

Setting Automatic Opening/ Closing of Monitor

When the Automatic Opening/Closing mode is "ON," the monitor automatically opens when the ignition key is turned to the "ACC" or "ON" position. The monitor automatically closes when the ignition key is turned OFF.

NOTE

After carrying out the steps 1 to 3 of "To display the Setup mode screen" described on page 40, perform the operation show below.

1 Press the SOURCE button.

The main menu appears on the display.

2 Press the 6 (SETUP) button. The Setup mode screen appears.

3 Rotate the rotary encoder and select "AUTO OPEN."

The display shows the Function Guide.

4 Press the 2 (ON) button to set the Auto Opening mode ON.

To set the Auto Opening mode OFF, press the 1 (OFF) button. If set to the "OFF" position, the monitor should be manually opened or closed by pressing the OPEN/CLOSE button.

5 Press the FUNC (RETURN) button, the display returns to the main menu screen.

NOTE

Immediately after inputting titles or changing the settings of Setup Mode or Display Mode (While the system is inputting the titles or data automatically) do not turn the ignition key (engine key) to OFF.

Otherwise, the title may not be written, or the settings may not be changed.

Adjusting Brightness of Picture

To switch to the display mode screen or to the picture mode:

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1.Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2.Keep pushing the foot brake and release the parking brake once then engage it again.

3.While the parking brake is being engaged the second time, release the foot brake.

NOTE

For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the Display mode operation has been released. Unless the ignition key is turned to the OFF position, the Display mode can be activated by engaging the parking brake without performing the above procedure (1 through 3). Each time the ignition key is turned to the OFF position, perform the above procedure.

1 Press the SOURCE button.

The main menu appears on the display.

2 Press the 5 (DISPLAY) button. The Display mode screen appears.

3 Rotate the rotary encoder and select "BRIGHT" to activate the Brightness Adjustment mode. The display shows the Function Guide.

4 Press the 1 (; DARK) to make the picture darker

or press the 3 (LIGHT :) to make the picture brighter. You can adjust the brightness between MIN (–15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. To quickly set to the center position, press the 2 (±0) button.

5 When the adjustment has been completed, press the FUNC (RETURN) button. The display returns to the main menu screen.

NOTES

•With the Display mode screen displayed, pressing and rotating the rotary encoder can adjust the volume level.

•Immediately after inputting titles or changing the settings of Setup Mode or Display Mode (While the system is inputting the titles or data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the title may not be written, or the settings may not be changed.

47-EN

Page 48 Page 50
Image 49
Page 48 Page 50
Contents IVA-C801 CVA-1006 Alpine CD Changers Give You More Contents Installation and Connections Do not Disassemble or Alter Precautions Installation Location Page Basic Operation Radio Mode ScreenInitial System Start-UP Using Face CoverRaising the Monitor Compatibility with Factory Steering Wheel Radio ControlsAdjusting the Monitor Viewing Angle Turning Power On or OffLowering the Monitor Selecting the Monitor Opening AngleAudio Mute Function Fader Between Front and RearTurning Loudness On or Off 10-ENAutomatic Seek Tuning Manual TuningRadio Operation 11-EN12-EN Automatic Memory of Station PresetsTuning to Preset Stations Storing into Direct Access Preset D.A.P. BandSelecting Preset Stations from List Displayed V.S. Search for Local StationsFast Forward and Backward Playback14-EN Repeat Play Music Sensor SkipX. Random Play Displaying and Scrolling CD Title/ Text16-EN Displaying List of Track Titles/CD TitlesControlling CD Changer Optional Multi-Changer Selection17-EN Playing Mini-Disc MD MD player Operation Optional18-EN Displaying List for MD Titles Scrolling Displayed Titles19-EN Controlling Cassette Player Cassette Player Operation OptionalFast Forward/Rewind/Reversing Tape Direction/Pause 20-ENBlank Skip Program Sensor21-EN Still/Pause Playing DVD/Video CD/CD22-EN To activate your auxiliary devicesFast Forward/Backward Chapter DVD/Track Video CD SensorPlaying tracks in random order M.I.X.Video CD/CD Displaying List of Disc Titles24-EN Controlling DVD ChangerControlling Navigation System Navigation System Operation Optional25-EN Operating Auxiliary Devices Auxiliary Device Operation Optional26-EN Audio Processor Operation Optional Selecting Factory Makers Equalization Presets27-EN Creating Personal Equalizer Characteristic Curves Selecting Factory Surround Mode Presets28-EN 29-EN Setting DHE Power or Fine Mode Selecting BBE ModeEffect of the Power On mode Effect of the Fine On modeSelecting Listening Position Customizing BBE Mode Adjusting Listening Position31-EN Adjusting Cross-Over X-Over Point of 2-Way Divider Adjustment of Time Correction Value32-EN 33-EN Adjusting Levels34-EN Adjusting Time-Correction for 2- Way Speaker SystemMemorizing Characteristic Curves Memorizing Divider SettingsRecalling Memorized Divider Settings Using Function Buttons Recalling Divider Settings Memorized Using Optional DividerDisplay the Audio Processor List screen 36-ENDisplaying Spectrum Analyzer Other Useful Features37-EN Titling Radio Stations/CDs Turning Defeat Mode On and Off38-EN To display the Title Inputting screen39-EN 40-EN To display the initialization mode screenSetting the External Device Interrupt Mode Switching PhaseMute OFF mode 41-ENInterrupt Feature MIX Level Setting Interrupt Icon Display IN-INT42-EN Setting Visual Mode Setting Bass Frequency43-EN 44-EN Selecting Rear MonitorSetting Daylight Saving Time Resetting ClockDisplaying Time 45-EN46-EN Sound Beep Guide Function DemonstrationSetting Automatic Opening/ Closing of Monitor Adjusting Brightness of PictureTo switch to the display mode screen or to the picture mode 47-EN48-EN Adjusting Tint of Picture Adjusting Color of PictureIllumination Control Switching Background Textures/ Colors49-EN Setting Automatic Background Texture/Color Scroll Switching Display Modes50-EN 51-EN Playing 2 Sources SimultaneouslyControls on Remote Control Remote Control Operation52-EN 53-EN Battery ReplacementCase of Difficulty Information54-EN 55-EN 56-EN Indications for CD Changer Optional57-EN SpecificationsChassis Size Tuner section CD Player Section IVA-C801 onlyPrecautions Installation and Connections58-EN Installing the Monitor Place of installation Installation59-EN Removal60-EN Installing the Tuner61-EN Parking Brake Lead Connection62-EN Connections IVA-C801/CVA-1006 Wiring DiagramIllumination Lead Orange 63-ENSystem Example When connecting the DVD changer64-EN 65-EN Remote Output Terminal System Switch

IVA-C801 specifications

The Alpine IVA-C801 is an innovative multimedia receiver that has redefined in-car entertainment by integrating advanced technology with user-friendly features. This versatile system blends high-performance audio playback with robust video capabilities, making it a perfect choice for audiophiles and casual listeners alike.

One of the standout features of the IVA-C801 is its 7-inch wide touchscreen display. This TFT LCD screen offers exceptional resolution, which ensures crystal-clear visuals whether you're watching videos or navigating through menus. The screen is designed with a user-friendly interface, giving drivers easy access to their favorite apps, songs, and settings without taking their focus off the road.

The Alpine IVA-C801 supports a variety of media formats, accommodating CD, DVD, and MP3 playback. This flexibility allows users to enjoy their favorite music and movies exactly how they want. Additionally, the receiver is equipped with a built-in AM/FM tuner and is compatible with HD Radio, providing crystal-clear reception of local stations.

Another crucial aspect of the IVA-C801 is its Bluetooth connectivity. This feature enables hands-free calling and wireless streaming, allowing users to enjoy their playlists or take calls without the hassle of tangled wires. The unit can also sync with smartphones, providing access to apps such as Spotify and Pandora directly from the touchscreen.

For those who prioritize sound quality, the IVA-C801 includes a powerful built-in amplifier and a range of audio tuning options. The system features advanced equalization settings, allowing users to customize the sound output to their personal preferences for a richer listening experience. The receiver is also compatible with Alpine's array of premium speakers, enhancing the audio fidelity even further.

Additional technology highlights of the IVA-C801 include a rear-view camera input for enhanced safety during parking maneuvers, as well as a video output for connecting to additional screens. The intuitive layout and customizable backgrounds of the interface make the receiver a standout in terms of both aesthetics and functionality.

In conclusion, the Alpine IVA-C801 is not just a receiver but a comprehensive multimedia solution for any vehicle. Its blend of high-quality audio and video performance, combined with cutting-edge features like Bluetooth connectivity and user-friendly interface, positions it as an ideal choice for those looking to elevate their driving experience. With the IVA-C801, Alpine continues to set the standard in automotive entertainment, making every drive enjoyable and engaging.
Top Page Image Contents