Alpine IVA-C801 owner manual Memorizing Divider Settings, Memorizing Characteristic Curves, 35-EN

Press the 4 (A.PROC) button.

The Audio Processor List screen is displayed.

Rotate the rotary encoder and select "Adaptive EQ." The Function Guide screen is displayed.

Memorizing Divider Settings

You can store your settings of the divider(s) in memory when you have adjusted them.

1 After adjusting the divider(s), display the Divider mode screen.

Press and hold any one of the Function buttons 1 (P.SET1) through 4 (P.SET4) for at least 2 seconds.

The indicators for the 4 buttons blink for 5 seconds.

2 While the indicators are still blinking, press the Function button into which you want to memorize (preset) the divider settings. Repeat the above steps to memorize 3 other divider settings.

Recalling Memorized Divider Settings Using Function Buttons

1 Display the Divider mode screen.

Press the Function button 1 (P.SET1) through 4 (P.SET4) that has your desired divider settings.

The divider setting stored at the Function button will be recalled.

Tip

You can also recall your desired divider settings memorized by pressing the 4 (;P.DN) or 5 (:P.UP) button in the Divider mode.

Recalling Divider Settings Memorized Using Optional Divider

If an optional Alpine divider (such as PXA-H600/ PXA-H510) is connected, you can recall the settings memorized using the optional divider.

1 Press the SOURCE button.

The main menu is displayed on the display.

2

3

4 Press the Function button 1 (P.SET1) through

6 (P.SET6) that has your desired setting memorized using the optional divider.

5 Press the FUNC (RETURN) button.

The display returns to the main menu screen.

Memorizing Characteristic Curves

Equalization characteristic curves created by yourself or factory preset can be stored in memory. (See page 27.)

1 Select one of the factory preset characteristic curves or make your own (personal) characteristic curve. Then, display the Audio Processor List and select "Private Memo."

2 Press and hold any one of the Function buttons 1 (P.SET1) through 6 (P.SET6) for at least 2 seconds.

The Function Guide indicators P.SET1 through P.SET6 in the preset mode display blink indicating that you can memorize the characteristic curve.

3 While the Function Guide indicators are blinking, press the Function button 1 (P.SET1) through 6 (P.SET6) into which you wish to memorize the characteristic curve.

Now, the characteristic curve has been memorized.

Repeat this procedure to memorize other characteristic curves.

NOTE

This unit can memorize curves together with the settings of the equalizer, DHE, BBE and Surround Time Correction.

35-EN