Advantech IPPC-9151 Series IR Function Duplex, TX, RX inverting enable, Onboard Parallel Port

IR Function Duplex

This item allows you to select the IR half / full duplex function. The choices: Half; Full.

TX, RX inverting enable

This item allows you to enable the TX, RX inverting which depends on different H/W requirement. This field is not recommended to change its default setting.

The choices: “No, No”; “No, Yes”; “Yes, No”; “Yes, Yes”.

Onboard Parallel Port

Select a logical LPT port name and matching address for the physical par- allel (printer) port.

The choices: 378H/IRQ7; 278H/IRQ5; 3BC/IRQ7; Disabled.

Onboard Paralle Mode

Select an operating mode for the onboard parallel (printer) port. Select Normal, Compatible, or SPP unless you are certain your hardware and software both support one of the other available modes. The choices:

SPP; EPP; ECP; ECP + EPP.

ECP Mode Use DMA

Select a DMA channel for the parallel port for use during ECP mode. The choices: 3; 1.

Parallel Port EPP Type

Select EPP port type 1.7 or 1.9. The choices: EPP1.7; 1.9.

Onboard Legacy Audio

This field controls the on-board audio.

•Sound Blaster

•SB I/O Base Address

•SB IRQ Select

•SB DMA Select

•MPU-401

•MPU-401 I/O Address

•Game Port (200-207H)

3.Press <ESC> to return to the Main Menu when you finish setting up all items.

IPPC-9151 Series Users Manual 84