ENGLISH
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 16. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 12 for SCREEN ADJUSTMENTS.
(Press the Menu Button to start the On Screen Display feature. There are additional menu pages which can be switched by using the 
/ 
Buttons.
B Select the menu page which contains the adjustment item you want to make. Press the Menu Button. Then, use the 
/ 
Buttons to select the desired adjustment item.
CPress the Menu Button again. Use the 
/ 
Buttons to make the appropriate adjustment or setting.
DPress the Auto (Return) Button to go back to the previous screen.
For example, to correct for vertical position, select menu page of “Picture Control” and then press the Menu Button. Then, select “V Position” by using the 
/ 
Buttons.
An adjustment scale appears after you press the Menu Button. Use the 
/ 
Buttons to change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this.
NOTE
nThe On Screen Display disappears several seconds after you stop pressing the buttons while performing an adjustment.
nAny changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu.
nAdjustments for Position, Clock and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings.
8OPERATING THE MONITOR