ENGLISH
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1.Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2.
2.Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists.
3.If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem | Check |
A The picture does not appear. |
|
(Power indicator does not light up.) | o The Power Cable is firmly seated in the socket. |
| o The Power Switch is turned ON. |
| o The AC socket is live. Please check with another piece of equipment. |
(Power indicator is blue.) | o If the blank screen saver is in active mode, touch the keyboard or the mouse. |
| o Increase the Contrast and/or Brightness. |
| o The computer is ON. |
| o The Signal Cable is properly connected. |
| o The signal timing of the computer is within the specification of the monitor. |
(Power indicator is orange.) | o If the monitor is in power management mode, touch the keyboard or the mouse. |
| o If the input signal selection is different, switch the input signal. |
| o The computer is ON. |
| o The Signal Cable is properly connected. |
| o The signal timing of the computer is within the specification of the monitor. |
| o The Power Switch is turned ON. |
B The screen is not synchronized. | o The Signal Cable is properly connected. |
| o The signal timing of the computer is within the specification of the monitor. |
| o The video output level of the computer is within the specification of the monitor. |
C The screen position is not in the | o The signal timing of the computer is within the specification of the monitor. |
center. |
|
D The screen is too bright or too dark. | o The video output level of the computer is within the specification of the monitor. |
E The screen is shaking. | o The power voltage is within the specification of the monitor. |
| o The signal timing of the computer is within the specification of the monitor. |
F No sound from the speakers. o The Speaker Cable is properly connected.
oThe sound volume is minimum.
14 TROUBLE SHOOTING