Selection of TV Channel, PC Analog PC Digital, AV1

n Display the adjustment menu page

The menu page appears on the screen when you press the MENU Button on the monitor	[ Remote Control ] Press the MENU Button.
or the Remote Control.
The menu page disappears when you press the Menu Button on the Remote Control
again.

[Monitor ] Press the MENU Button.

NOTE The MENU Button on the monitor is also used to confirm a selected menu item or setting.

ENGLISH

n Switch the input signal

This is switched when you successively press the Input Button on the monitor as follows:

PC (ANALOG)

PC (DIGITAL)

AV-1

AV-2

[ Monitor ] Press the Input Button.

[Remote Control ] Press the Input Signal Select Button.

This is switched when you successively press

the button as follows:
n TV:	TV is ON.
nVIDEO:	AV1	AV2

nPC:	PC Analog PC Digital

SELECTION OF TV CHANNEL

To select a TV channel, pick the program number you want on Channel Set-up.

n Method by using Ch Up / Down button

You can select channels in numerical order by pressing Ch Up button on the remote control or Up button on the monitor in TV input. You can select channels in reverse by pressing Ch Down button on the remote control or Down button on the monitor.

NOTE You can select only the program number which you set the SKIP function”Off”.

n Method by using number button

You can select the channel you set up on program number by pressing the number button. <Program number 10-99>

--is displayed on the screen by pressing button.

Enter the program number you want to select by pressing the number button. (e.g. Program number 15)

A E

20 APPENDIX B