Channel Set-up

ENGLISH

Channel Set-up is available for TV Input only.

This should be implemented first when you use the monitor as a television.

(TV)

Adjustment Item

Problem / Option

Button to Press

Auto Store

Sound

B/G

System*1

Select the Sound System of the

D/K

received broadcasting station.

Store

Return to the line of the adjustment items.

Yes

Select the receivable channels automatically.

Store

Return to the line of the adjustment items.

(Cable)

Yes

Select the receivable channels automatically.

NOTE n Some channels are not selected automatically depending on the signal condition. n Select “Store (Cable)” when the broadcasting frequency is different from the one

listed on the Table for receivable channels. (e.g. Cable TV) In this case, it takes approximately 10 minutes to exit.

Manual Store

Program

Select the program number.

•â‘«

Channel*2

Select the channel number.

Sound System*1

Select the Sound System of the

received broadcasting station.

Fine Tune

Fine tune the frequency of the

selected channel if the picture is

distorted depending on the signal

condition.

Skip

Off

Ch Up / Down key on the remote control or the

monitor enables you to select the channels.

Ch Up / Down key on the remote control or

the monitor enables you to skip when you

select the channels.

Save

Save the complete installed contents.

Move

Select the program number of the

From

channel you want to move.

Select the program number that

you want to move the channel

to.

Save

Save the installed contents.

*1 If you do not select Sound System properly, the noise may be generated in the sound or the vertical wavy lines in the zebra pattern may appear in the picture.

Sound System vary by region as follows:

B/G: West Europe I: U.K. , Ireland D/K: East Europe L: France

For more details, please contact your local iiyama dealer or regional iiyama office.

*1*2 For the receivable channels on each Sound System, see Table for receivable channels.

24 APPENDIX B