CONTROLS AND CONNECTORS
ENGLISH
Top
| INPUT | AUTO | MENU | Vol | Down / Up | POWER | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front
Top
APower Switch
The monitor saves the power ON / OFF setting before the Power Cable is disconnected.
If the monitor is OFF when connecting the Power Cable, press the Power Switch to turn ON the monitor. The Power Indicator turns to blue.
If the monitor is ON when connecting the Power Cable, the Power Indicator turns to blue. Press the Power Switch again to turn OFF the monitor.
BSelect Button (
/ 
)
CVol: Volume Control Button (
/ 
)
DMenu Button
The menu page appears or disappears on successive presses of the Menu Button.
EAuto Button (Auto
Adjust H Position, V Position, Clock and Phase automatically by pressing for one second or more when the menu page is not displayed.
* Available for PC Analog input only.
Auto Button / Return Button
NOTE n For best results, use the Auto
n The screen becomes dark for a while during the adjustment.
nGo back to the previous screen when the menu page is displayed on the screen.
FInput Button (Input Signal Select) Switch PC Analog or PC Digital input.
Front
GSpeakers
HPower Indicator
NOTE Blue: Normal operation
Orange: Power Management
The monitor enters into power management mode which reduces the power consumption to less than 5W when receiving no horizontal and/or vertical sync signal.
IRemote Sensor
4BEFORE YOU OPERATE THE MONITOR