Elo TouchSystems 2400LM manual

Page 4

Warnings and Cautions

Warning

Danger - Explosion hazard. Do not use in the presence of flammable anesthetics, and other flammable materials.

To prevent fire or shock hazards, do not immerse the unit in water or expose it to rain or moisture.

Do not use the unit with an extension cord receptacle or other outlets unless the prongs of the power cord can be fully inserted.

RISK OF ELECTRICAL SHOCK - DO NOT OPEN. To reduce the risk of electrical shock, DO NOT remove the back of the equipment or open the enclosure. No user-serviceable parts are inside. Refer servicing to qualified field service engineers only.

Uninsulated voltage within the unit may have sufficient magnitude to cause electrical shock. Avoid contact with any part inside the unit.

This device complies with all applicable electromagnetic emission and immunity standards for medical device equipment. This device is designed to not cause harmful interference, and to accept any interference received, including interference that may cause undesired operation. The performance of this device is limited to the emission and immunity standards that have been applied. Other device which are not designed to withstand emission levels as specified in the medical device standards may be susceptible to interference from this device.

Subjecting the device to conditions beyond the rated performance capabilities may result in emissions in excess of the standard. If it is determined that this device produces electromagnetic or other interference it must be disconnected from power until the cause of the problem has been determined and resolved. If it is determined that this device is functioning improperly due to electromagnetic and other interference it must be disconnected from power until the cause of the problem has been determined and resolved.

Elo TouchSystems recommends that after its useful life (or after sustaining unrepairable damage), customers dispose of the touchmonitor and its power supply in an environmentally sound manner. Acceptable methods include the reuse of parts or whole products and the recycling of products, components, and materials. Please consult and obey national state, and local laws and ordinances governing the safe disposal of electronic equipment.

Note that the fluorescent lamps inside this product contain mercury and must be recycled or disposed of according to local, state, or national laws. For more information, contact the Electronic Industries Alliance at www.eiae.org.

This product consists of devices that may contain mercury, which must be recycled or disposed of in accordance with local, state, or federal laws. (Within this system, the backlight lamps in the monitor display contain mercury.)

iv

Image 4
Contents Touchmonitor User Guide Elo TouchSystems LCD Touchmonitor User Guide Revision CCopyright 2010 Tyco Electronics. All Rights Reserved Page Page Definitions Patient EnvironmentClassification Environmental conditions for transport and storageEuropean Standards and Classifications Standards EN 60601-1-2 2001+A12004Cispr Mains interruptions, it is recommended that Portable and mobile RF communications equipment Xii Table of Contents Introduction Product DescriptionExternal Medical Grade Power Supply LCD Display Performance FeaturesTFT LCD Display Panel Installation and Setup Unpacking Your TouchmonitorProduct Overview Base Bottom View KensingtonTM Lock Page Touch Interface Connection Remove the Cable CoverConnecting the Video Cable Connecting the Serial and USB Touchscreen Cable Connecting the Speaker Cable Connecting the Power Cable Screw hole Replace the Cable CoverMounting the Display Vesa mounting interface location, pedestal removedˆVesa Mounting Options Rear Mounting Using the Vesa InterfaceErgotron Innovative Office Products Installing the Touch Driver Software Optimizing the LCD DisplayInstalling the Serial Touch Driver Click Start RunInstalling the Serial Touch Driver for MS-DOS and Windows Installing the USB Touch Driver About Touchmonitor Adjustments OperationPower Switch Bottom Panel ControlsControl Function Menu/Exit SelectOSD Locking and Unlocking Feature Controls and AdjustmentOSD Menu Functions OSD Control Options Power Mode Consumption Power Display & Power SavingDisplay Angle Solutions to Common Problems TroubleshootingProblem Suggestions Native Resolution InputVideo 24 LCDPage Touchmonitor Safety Care and Handling of Your Touchmonitor Waste Electrical and Electronic EquipmentWEEE DirectiveTechnical Specifications Display ModesTouchmonitor Specifications Display ModePower Supply Specification LCD Touchmonitor 2400LM Dimensions Electrical Safety Information Regulatory InformationPage III. Agency Certifications Warranty Page Check out Elo’s Website