Elo TouchSystems 2400LM manual Installing the Serial Touch Driver for MS-DOS and Windows

Installing the Serial Touch Driver for MS-DOS and Windows 3.1

You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS.

To install Windows 3.x and MS-DOS touch driver from Windows 95/98, follow the directions below:

1Insert the CD-ROM in your computer’s CD-ROM drive.

2From DOS, type d: and press the Enter key to select the CD-ROM (your CD-ROM drive may be mapped to a different drive letter).

3Type cd\elodos_w31 to change to the correct directory.

4Type Install and press Enter to start the installation.

5Calculate the touchscreen.

2-17