Elo TouchSystems 2400LM manual Classification, Environmental conditions for transport and storage

Page 7

Classification

With respect to electrical shock, fire in accordance with UL60601-1 and CAN/CSA C22.2 No. 60601-1

This monitor is a Class I (GROUNDED) DEVICE.

These displays are classified NO APPLIED PARTS EQUIPMENT.

Protection against harmful ingress of water:

INGRESS PROTECTION (IPX1) (for monitor only)

This monitor shall be classified as ORDINARY EQUIPMENT, not intended or evaluated for use in the presence of flammable anesthetic mixture with air, oxygen, or nitrous oxide.

Mode of Operation: CONTINUOUS OPERATION.

Environmental conditions for transport and storage

Temp.

Operating

0oC to 40oC

 

Storage / Transportation

-20oC to +60oC

Humidity (non-condensing)

 

 

 

Operating

20%

to 80%

 

Storage / Transportation

10%

to 90%

Altitude

Operating

0 to 3,000M

 

Storage / Transportation

0 to 12,192M

For full Product Specifications refer to Appendix C

vii

Image 7
Contents Touchmonitor User Guide Revision C Elo TouchSystems LCD Touchmonitor User GuideCopyright 2010 Tyco Electronics. All Rights Reserved Page Page Patient Environment DefinitionsEnvironmental conditions for transport and storage ClassificationStandards EN 60601-1-2 2001+A12004 European Standards and ClassificationsCispr Mains interruptions, it is recommended that Portable and mobile RF communications equipment Xii Table of Contents Product Description IntroductionExternal Medical Grade Power Supply LCD Display Performance FeaturesTFT LCD Display Panel Unpacking Your Touchmonitor Installation and SetupProduct Overview Base Bottom View KensingtonTM Lock Page Remove the Cable Cover Touch Interface ConnectionConnecting the Video Cable Connecting the Serial and USB Touchscreen Cable Connecting the Speaker Cable Connecting the Power Cable Replace the Cable Cover Screw holeVesa mounting interface location, pedestal removedˆ Mounting the DisplayVesa Mounting Options Rear Mounting Using the Vesa InterfaceErgotron Innovative Office Products Optimizing the LCD Display Installing the Touch Driver SoftwareClick Start Run Installing the Serial Touch DriverInstalling the Serial Touch Driver for MS-DOS and Windows Installing the USB Touch Driver Operation About Touchmonitor AdjustmentsSelect Power SwitchBottom Panel Controls Control Function Menu/ExitOSD Locking and Unlocking Feature Controls and AdjustmentOSD Menu Functions OSD Control Options Power Mode Consumption Power Display & Power SavingDisplay Angle Solutions to Common Problems TroubleshootingProblem Suggestions InputVideo 24 LCD Native ResolutionPage Touchmonitor Safety Waste Electrical and Electronic EquipmentWEEE Directive Care and Handling of Your TouchmonitorDisplay Modes Technical SpecificationsDisplay Mode Touchmonitor SpecificationsPower Supply Specification LCD Touchmonitor 2400LM Dimensions Regulatory Information Electrical Safety InformationPage III. Agency Certifications Warranty Page Check out Elo’s Website