Cassette tape player operation

2-12 Controls and operation

Eject and tape-in indicator

When a cassette is inserted, the aperture door closes and a cassette icon is displayed. Press to eject the cassette.

Fast forward and rewind

These controls have two functions,

to seek a track, and tape fast forward or rewind. Momentarily pressing the right- hand button will locate the beginning of the next track. Similarly pressing the left- hand button, will return to the beginning of the current track. Pressing and holding

The audio display will indicate which function has been selected. Messages include:

SIDE1 UP1	Locate beginning of next
	track on side 1.
SIDE1 DN1	Locate beginning of track
	being played on side 1.
SIDE1 REW	Rewind.
SIDE1 FF	Fast forward.
LOADING	Loading tape.
TAPE EJECT	Ejecting tape.
TAPE CLEAN	Tape mechanism
	requires cleaning.

When loaded, a tape immediately plays and after playing one side, auto-reverses and plays the other. Equalisation of non-ferric tapes is automatically adjusted.

TAPE button

If you are playing the radio or

CD changer, pressing TAPE will play any cassette in the player. This function can also be controlled by a button on the steering wheel (see page 2-1).

Change tape side

While playing a cassette, press the TAPE button to change to the other side of the tape. This function can also be controlled by a button on the steering wheel (see page 2-1).

the appropriate button for two seconds will activate continuous fast forward or rewind of the tape. This can be cancelled by pressing either button again.

Dolby B

When using a cassette with a ‘Dolby’ recording, the noise reduction system can be selected by pressing the DOLBY on/off button. DOLBY will be displayed to indicate the system is active.

Dolby noise reduction system is manufactured under licence from Dolby Laboratories Licensing Corporation. ‘Dolby’ and the double-D symbol are trade-marks of

Dolby Licensing Corp.

2-12 Controls and operation