| Controls and operation |
|
|
RBDS |
|
|
|
Incorrect response from RBDS | Reason and rectification |
|
|
Radio does not display programme name. | Check that RBDS is turned on by pressing and holding the TA button until the |
| display confirms RBDS ON. If the radio does not display a programme service |
| name, it is not broadcasting RBDS data, or you are in a poor reception area. |
| Try |
|
|
Station name is lost and displays frequency only. | Radio has lost reception of the RBDS data due to vehicle moving out of |
| transmitter range, loss of signal in a tunnel, under a garage forecourt canopy, or |
| similar screening. If the latter is the case, when the vehicle is clear of the |
| screening, the station name will return after a short delay. |
|
|
Upon operating A MEM, NO FM is displayed | The radio cannot locate nine FM or RBDS FM stations dependent upon the mode |
when most or all of the preset positions are | selected. If this occurs, switch off RBDS and reselect A MEM. |
selected. |
|
|
|