RADIO OPERATION
Radio Operation
This device is equipped with an RDS radio receiver. Many FM stations trans- mit an additional signal containing ex- tra information such as station name and program type (PTY).
As soon as it can be received, the name of the station is shown in the display.
Switching on Radio Operation
If the current operating mode is cassette or
➮Press the BND/TS button 5.
RDS Convenience Function (AF, REG)
The RDS convenience functions AF (al- ternative frequency) and REG (region- al) extend your radio’s functional pow- er.
●AF: If the RDS convenience func- tion has been activated, the device automatically switches to the best frequency on which the chosen station can be received.
●REG: Some stations divide their programs at certain times into re- gional programs with different con- tent. The REG function prevents the car radio from switching to al- ternative frequencies with different program content.
Note:
●REG must be separately activated or deactivated in the menu.
Switching REG On / Off
➮Press the MENU button 8.
➮Press the 
or 
button :until “REG” appears in the display.
Either “OFF” or “ON” is displayed after “REG”.
To turn REG on or off
➮Press the 
or 
button :.
➮Press the MENU button 8 or OK
;.
Switching RDS convenience function on/off
To use the RDS convenience functions AF and REG
➮Press the RDS button 4.
The RDS convenience functions are active if RDS shows in the display.When the RDS convenience functions are switched on “REG ON” or “REG OFF” flashes up.
Select Waveband/Memory Level
This radio receives stations in the VHF (FM) waveband as well as MW and LW (AM) stations.Three memory levels are available for the FM waveband, and one memory level is available for each of the MW and LW bands.
Six stations can be stored in each mem- ory level.
To switch between memory levels and wavebands
➮Press the BND/TS button 5 brief- ly.
ENGLISH
39