RADIO OPERATION
Note:
●If no station is found with the cho- sen program type, a beep is heard and the display briefly shows “NO PTY”. The tuner returns to the most recently received station.
If the station set, or another station from the station chain, starts to transmit the desired program type at a later time, the device changes automatically from the current station, or out of cassette or CD changer operation, and switches over to the station with the desired program type.
Switching PTY On / Off
➮Press the MENU button 8.
➮Press the 
or 
:until “PTY ON” or “PTY OFF” appears in the display.
➮Use the 
or 
button :to turn PTY ON or OFF.
When PTY is switched on, “PTY” shows in the display.
➮Press the MENU button 8or OK
;.
Selecting the program type and starting the search
➮Press the 
or 
button :.
The current program type is shown in the display.
To change to a different program type
➮Press the 
or 
button :while the type display is active.
or
➮Press one of the buttons 1 - 6 > to change the program type stored for that button.
The selected program type is briefly dis- played.
➮Press the 
or 
button : to start the search.
The next station with the selected pro- gram type is tuned in.
Storing the program type on the station button
➮Select a program type with the 
or 
button :.
➮Hold down the desired station but- ton 1 - 6 > for longer than two seconds.
The program type is saved on the cho- sen button 1 - 6 >.
Optimising Radio Reception
Treble cut in the presence of interference (HICUT)
The HICUT function improves the sound when radio reception is poor (FM only). When interference is being experienced, the treble is automatically cut, which therefore also reduces the level of in- terference.
Switching HICUT On / Off
➮Press the MENU button 8.
➮Press the 
or 
button :until “HICUT” appears in the display.
➮Press the 
or 
button : to ad- just the HICUT.
42