TRAFFIC INFORMATION
Traffic Information
This device is equipped with an RDS EON receiver. EON means Enhanced Other Network.
Whenever a traffic announcement (TA) is made, the radio switches automati- cally from a station that does not broad- cast traffic information to one in the chain of stations that does.
After the traffic announcement, the de- vice returns to the station that was pre- viously tuned in.
Switching Traffic Information Priority On / off
➮Press the TIM button @for longer than two seconds.
Traffic announcement priority is activat- ed if the traffic jam symbol is illuminat- ed.
Note:
You will hear a warning tone:
●If you leave the reception area of a traffic radio station you are listening to.
●If, when you are listening to a cas- sette, you leave the reception area of the selected traffic radio station, and the automatic search which then follows fails to find a new traf- fic radio station.
●If you change from a traffic radio station to a station with no traffic information.
Either switch off the traffic information priority, or switch to a station with traffic information.
Adjusting the Volume for Traffic Announcements
➮Press the MENU button 8.
➮Press the 
or 
button :until “TA VOLUME” appears in the dis- play.
➮Use the 
buttons : to adjust the volume.
➮Press the MENU button 8or OK
;.
Note:
●During a traffic announcement you can adjust the volume for the dura-
tion of the announcement using the volume control 2.
Note:
●You can set the tone and volume for traffic announcements. For more information, consult the sec- tion on “Tone and volume controls”.
44