Blaupunkt Verona C51 Volume Adjustment, Setting Switch-On Volume, Immediate Volume Reduction Mute

Page 8

VOLUME ADJUSTMENT

Volume Adjustment

The volume can be adjusted in steps from 0 (off) up to 66 (maximum).

To increase the volume

Turn the volume control 2 to the right.

To reduce the volume

Turn the volume control 2 to the left.

Setting Switch-On Volume

The volume the device plays at when switched on can be adjusted as follows:

Press the MENU button 8.

Press the or button :until “ON VOLUME” appears in the dis- play.

Adjust the switch-on volume with

the buttons :.

If you set “0”, then whatever volume was in use before the device was switched off will be reactivated.

Risk of serious injury! If the level of switch-on volume is set to maxi- mum, the volume when switching on may be very high.

If the volume was set to maximum before switching off, and the value for the switch-on volume is set to “0”, the volume when switching on can be very high.This can damage hear- ing!

Press the MENU button 8 or OK

;.

Immediate Volume Reduction (Mute)

You can reduce the volume immediate- ly (mute) to a pre-set level.

Press button 3briefly. “MUTE” appears in the display.

Adjusting Muted Volume

The mute level is adjusted as follows:

Press the MENU button 8.

Press the or button :until “MUTE LEVEL” appears in the dis- play.

Adjust the mute level with the buttons :.

Press the MENU button 8 or OK

;.

Telephone Audio/Navigation Audio

If your car radio is connected to a mo- bile telephone or navigation system, then when the telephone is taken “off the hook”, or when the navigation sys- tem is speaking, the car radio is muted. The telephone conversation or speech output are reproduced via the car radio speakers.This requires the mobile tele- phone or navigation system to be con- nected to the car radio as described in the installation instructions.

Your Blaupunkt dealer can tell you which navigation systems can be used with your car radio.

ENGLISH

37

Image 8
Contents Verona C51 Page Display DEQ button Digital Equalizer to switch equalizer on/offOperating Elements Table of Contents Road Safety AccessoriesOnly use accessories approved by Blau- punkt Remote control FittingRelease Panel Release PanelTheft Protection Removing the Release PanelSwitching on and OFF Switching On and OffVolume Adjustment Volume AdjustmentSetting Switch-On Volume Immediate Volume Reduction MuteAdjusting the Volume of the Confirmation Tone Put as they are made with the vol- ume controlSwitching on Radio Operation Radio OperationRadio Operation RDS Convenience Function AF, REGSetting the Station Adjusting Station Search SensitivitySaving Stations Saving Stations Automatically TravelstoreSetting Scan Time Going to Pre-set StationsScanning Through Available Stations Scan Program Type PTYOptimising Radio Reception Press the or button to ad- just the HicutAdjusting the Display Select Display of Running TextsSwitching Traffic Information Priority On / off Adjusting the Volume for Traffic AnnouncementsTion of the announcement using the volume control Traffic InformationSwitching TIM On / Off Traffic Information MemoryTraffic Information Memory TIM Listening to TIM messagesMemory Cassette OperationExtending TIM Standby Time Cassette PlayCassette Operation Resetting the Tape Counter Pausing During PlaySwitching the Radio Monitor On / off Fast WindingCassette Operation CD Changer Operation CD Changer OperationCD Changer Operation Repeat Playing Tracks or Whole CDs RepeatPlaying Tracks in Random Sequence MIX Sampling All Tracks on All CDs ScanNaming CDs Return to the menu by pressing the OK buttonSetting the Time CD Changer Operation Clock TimeClock Time Displaying the Time BrieflyDisplaying the time briefly when the device is switched off Choosing 12/24 Hour Clock ModeTone and Volume Controls Tone and Volume ControlsSwitching Loudness On / Off Setting Loudness IntensityAdjustment Instructions Loudness EqualizerAdjusting the Level Indicator Switching the Equalizer On / OffSetting the Equalizer Equalizer Adjustment Guide Sound quality/problem ActionSwitching AUX Input On / Off AUX input must be switched on in the menuExternal Audio Sources External Audio SourcesGuarantee Technical DataTechnical data