VOLUME ADJUSTMENT
If a traffic announcement is received during a telephone call, or while the navigation system is speaking, the traf- fic announcement is not reproduced until the call or the speech output has finished.
If a call is received or if the navigation system begins speaking during a traffic announcement, the announcement is reproduced. The telephone call or speech output can be heard when the traffic announcement has finished.
The volume at which navigation output or telephone calls start is adjusted as follows:
➮Press the MENU button 8.
➮Press the 
or 
button :until “TEL/NAVI VOL” appears in the dis- play.
➮Set the desired volume with the 
buttons :.
➮Press the MENU button 8or OK
;.
Note:
●You can adjust the volume level of telephone calls and of speech out-
put as they are made with the vol- ume control 2.
Adjusting the Volume of the Confirmation Tone
With certain functions, if you hold a but- ton pressed for longer than two seconds, e.g. when saving a station frequency on a station button, a confirmation tone (or beep) is heard.To adjust the volume lev- el of the beep
➮Press the MENU button 8.
➮Press the 
or 
button :until “BEEP” appears in the display.
➮Adjust the desired volume with the 
buttons :.
“0” means no beep, “9” means maximum beep volume.
➮Press the MENU button 8or OK
;.
38