Blaupunkt RCM 169 operating instructions Aud, Dis

Quick Reference

Tape deck operation

/ Selects title (S-CPS)

Forward

Rewind

>>Fast forward

<< Fast rewind

CD changer operation

<</ >> Selects CDs

>> Up: Press briefly

<<Down: Press briefly

/ Selects tracks Up: Press briefly

CUE - fast forward (audible): Hold pressed down

Down: Press briefly twice or repeatedly in succession Restart a track: Press briefly

Review - fast reverse (audi- ble): Hold pressed down

8DSC (Direct Software Control)

Use DSC to adjust those basic settings which can be programmed. For more information refer to “DSC program- ming”.

9AUD

Adjusts Treble, Bass, Fader (front/ rear), Balance (left/right), Loudness (boosts lower frequency ranges at low volume to create a more natural sound) and SUB (-out) to adjust the amplifier level for the SUB-woofer.

Making adjustments: Select the operating mode.

Press AUD once and select the func- tion you wish to adjust with the corre- sponding key. “Bass” and the current setting, for example, will appear in the top line of the display.

Use << / >> to alter the setting.

The last setting selected will be stored automatically.

SUB-Out

If a SUB-woofers is connected to the system, it is possible to adjust the out- put level with “SUB” and / .

To quit the AUD menu:

Press AUD or EXIT.

:DIS

Select from a number of displays

Radio operation

Press DIS repeatedly to select:

-the name of the station selected

-the current frequency

-PTY code

-clock

This will not operate properly unless the radio is tuned into an RDS station with adequate signal strength.

Press DIS for approx. 4 sec.:

to synchronise the clock (internal clock with the DCF-77 atomic clock).

Tape deck operation

Press DIS:

-Tape side

-Clock

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

59