Blaupunkt RCM 169 operating instructions Selecting a 12 or 24-hour mode, Synchronisation

Page 37

Clock - Time	DSA – Digital Sound Adjustment

Selecting a 12 or 24-hour mode

You can choose whether the time is dis- played in a 12 or 24-hour mode.

If necessary, refer to the section on “DSC programming - CLK, MODE”.

Use DSA to activate and adjust the equaliz- er functions and to perform DNC (dynamic noise covering). This allows you to adjust the sound of your car hi-fi system ideally to the listening conditions in the interior of your car.

Synchronisation

To improve the accuracy of the internal clock, it can be synchronised on a regular basis. This is only possible when the time is received via an RDS-CT signal and the au- tomatic synchronisation feature is switched on (default setting).

If the RDS-CT signal is not available, the audio system will attempt to receive the DCF-77 time signal (atomic clock) to cor- rect the time the next time it is switched off.

An overview of the equalizer functions

In-car hi-fi sound is affected by such things as the car interior (cushioning, windows), position of the speakers, etc.

You can use the integrated equalizer to store three different equalizer settings each for the right and left channel (EQ1 - EQ3).

Seven frequency bands can be adjusted per channel.

	Activating the equalizer settings	DEUTSCH
	You can activate the equalizer settings in	DEUTSCH
	You can activate the equalizer settings in
	the DSA menu.	ENGLISH
		ENGLISH
		FRANÇAIS
	• Press DSA and EQ one after the other.
		ITALIANO
		NEDERLANDS

The display will indicate “CLK Sync” while it	These settings can be made automatically
is synchronising the time.	using the hi-fi self-adjustment feature or
If you would like to switch off the synchroni-	manually.
sation feature, refer to “DSC programming -	The automatic settings can also be adjust-
CLK, SYNC”.	ed manually.
	In addition, there are five pre-set equalizer
	settings which cannot be altered.

	The setting selected last will appear in the
	The setting selected last will appear in the
	top line of the display.		SVENSKA
	“EQ1”, “EQ2”, “EQ3” or
	“ROCK”, “POP”, “JAZZ”, “CLASSIC”,
	“VOCAL”.


	The DOT display will indicate the frequency		ESPAÑOL
	band settings for the left or right channel for
	this equalizer setting.
	The “EQ1 - EQ3” settings can be selected


	automatically with the hi-fi self-adjustment		PORTUGUÊS
	feature and/or set manually. If necessary,

85

Image 37

Contents Atlanta RCM Erklärung der Positions-Nummern siehe Kurzanleitung Contents Contents Quick Reference Next FM Quick ReferenceNext AM MW, LW PRE Menu level Adjusting the radio functionsFM, TS, TA, AM, PS, Scan ExitREG Regional PTYRT Radio text MonoMIX Radio station seek tuning Rocker switchCLR NameDIS AUDDOT field Display= CDC ? TU tuner KeyCard theft protection system Eject@ Cassette slot Visual theft protectionRC 08 remote control unit Important notes Operating the unit for the first time KeyCard theft protection systemRemoving the KeyCard Incorrect KeyCardKeyCard theft protection system Lost or damaged KeyCard Switching off the flashing lightCare of your KeyCard Training the new KeyCard Activating the Install menu First-time installationClosing the Install menu Setting the clockSwitching the ignition connec- tion on/off First-time installationConnecting external equipment Reset to default settingsSelecting the operating Optimising the viewing Mode Angle Radio operation with RDS Radio Data System Switching between the menu levelsAF Alternative frequency Automatic tuning Station tuningRadio operation with RDS Radio Data System REG regional programChanging the memory bank FM Scrolling through the broadcast- ing networks FM onlyStoring stations To start Preset Scan Preset ScanScanning stored stations with Recalling stored stationsSwitching from stereo to mono Selecting the seek tuning sensi Automatic bandwidth adjustScanning stations with Radio Scan TivityProgram type Switching PTY on/offNews Selecting and storing PTY program typesRadio text PTY seek tuningTo select any program type Storing program typesSwitching the warning beep off Switching radio text offTraffic information station reception with RDS-EON Activating radio textSwitching on tape deck opera- tion Automatic seek tuning startTape operation Inserting a cassetteTape operation Selecting the display modeTrack reverse Scanning cassette titles withFast tape forward/rewind Repeating titles with RPTCare instructions Fast forward Fast rewindCD changer operation Switching on CD changer operationSelecting tracks CD changer operationRepeating tracks/CDs Deleting CD names/TPM at the same time Entering CD namesCD changer operation Clock Time Clock display when the audio system is switched offDisplaying the clock AutomaticallyActivating the equalizer settings Selecting a 12 or 24-hour modeSynchronisation Self-adjusting equalizer Switching the equalizer on/offHi-fi self-adjustment Starting the hi-fi self-adjustmentManual equalizer adjustment Activating an equalizer settingAltering the setting manually JazzAdjusting DNC sensitivity Adjusting DNCSwitching DNC on/off Safety informationTUN Tuner DSC programmingVAR Various DSC programmingScan Scantime ReadTOM SET CLK ClockSync CDC changer Overview of the DSC default settingsAmplifier Specifications Glossary Technical TerminologyTuner Tape deckREG Glossary Technical TerminologyGlossary Technical Terminology CPS IndexRDS-EON TPMUSA Service-NummernBosch Gruppe

Related manuals

Manual 44 pages 22.7 Kb