Quick Reference
After the beep press ON. The unit will switch on.
After the unit has played for an hour, it will switch off automatically to prevent the vehicle battery from running down.
3Adjusting the volume
Turn the knob to adjust the volume.
The volume setting will appear in the top line of the display. When the unit is switched on, it will play at a
VOL can be adjusted as well (refer to “DSC programming - VAR, VOL”).
4Softkeys / Display
Softkey = a key with changing func- tions
You can select the functions which ap- pear in the display.
Radio operation
Switching between the menu levels
During radio operation, you can press TU to switch between menu level 1 and menu level 2.
Menu level 1 contains four pages (FM1, FM2, FM3, FMT) which can be used to store radio stations. Press NEXT to switch to the next page.
Menu level 2 has two pages containing functions related to radio operation. Page 1 includes FM, TS, TA, AM, PS, SCAN.
Page 2 includes AF, LOC, PTY, REG, RT, MONO. Press PRE or NEXT to switch between the pages.
The unit will switch back to menu level 1 automatically 8 sec. after the last key has been pressed.
Menu level 1
Station keys and memory banks
NEXT - FM
Switches between FM1, FM2, FM3,
FMT
NEXT - AM (MW, LW)
Switches between the MW and LW wavebands
Keys 1 - 6
To store and recall radio stations on the FM waveband: FM1, FM2, FM3, FMT.
It is possible to store and recall 6 sta- tions each on the MW and LW wave- bands.
To store stations: Press the key for ap- prox. 1 sec.
To recall stations: Press the key brief- ly.
54