Blaupunkt RCM 104 A Scanning stations with Radio Scan, PTY Program Type, Program types

Page 13

Scanning stations with Radio Scan

Beginning with the station currently tuned in, you can scan the following stations. Choose the desired SCANTIME in the DSC menu.

To activate the scan:

Press PS for about 2 seconds. Either the scanned frequency or the station name starts flashing in the dis- play. During the actual scan process, “SCAN” is flashing.

To continue listening to a scanned stati- on/switch the scan off:

Briefly press PS.

If no station is selected during the scan, the scan function will be automatically switched off after the entire frequency band has been passed through. The radio will revert to the station the scan began from.

For more information, please also refer to chapter “DSC programming - SCANTIME”.

PTY Program Type

PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations in accordance with their program type. As soon as you have chosen the PTY of your preference, the cor-

responding stations can be selected by seek tuning or with the scan function.

Switching PTY on/off

Press PTY.

When the function is active, the display will briefly show the program type selected last; “PTY” is permanently indicated in the lower right corner of the display.

Program types

Use << >> to let the system display the program type selected last and to choose a new one.

You can select stored PTYs with the preset buttons 1 - 6. For this it is necessary that the PTY function is activated.

The program types listed below will then be available.

The letters printed in bold correspond to the actual PTY indication briefly displayed.

NEWS

CURRENT AFFAIRS

INFORMATION

SPORT

EDUCATE (education)

DRAMA

CULTURE

SCIENCE

VARIED

POP MUSIC

ROCK MUSIC

M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music)

PTY 16 to PTY 30 are not yet assigned.

Displaying the program type

Press << or >>.

The program type selected last will be briefly displayed.

Selecting a program type

a)Using the preset buttons

If PTY is switched on, you can select the program types assigned at the fac- tory with preset buttons 1 - 6.

If you would like to store other PTYs, read through chapter “DSC pro- gramming - PTY SET”.

Press one of the buttons 1 - 6. The display shows the selected program type for three seconds.

Press / while the PTY is display- ed: This will start seek tuning for a station offering the specified pro- gram type.

36

Image 13
Contents Barcelona RCM 104 a 15 14 Table of contents Switching off Switching onQuick instructions FMTAF Mode DSC ModeCPS AUDTIM/TA 3, 4, 5, 6 preset buttonsScan ? BC Dolby BC NR@ Eject button Press Cassette loading slot To change the seek tuning sensitivi- ty Press loTape side selector MIXInstallation/connection Traffic safetyImportant notes What you really have to readOptical indication of theft protection KeyCardNever try to pull out the KeyCard by force Replacing a KeyCardAF Alternative Frequency RDS Radio Data SystemADA on/off antenna test Stereo mono switch FM Adjusting the seek tuning sensi- tivityREG Regional Selecting the wavebandChanging the memory bank FM Preset scanningStoring stations Recalling stored stationsPTY Program Type Scanning stations with Radio ScanProgram types PTY priority Tuning into a station with PTYReception of traffic announcements with RDS-EON Switching the warning beep offEnhanced Other Networks Traffic announcement priority on/offAdjusting the traffic message volume Automatic seek tuning startTraffic Memo TIM Adjusting the TIM standby mode/TIM time Setting the time in the DSC menuDeactivating the TIM standby mode Motor antenna could be damaged in a car washRT Radiotext Do not switch on the radio until you have left the car washIf you are sure Tape operation Dolby BC NR Listening to the radio during fast Tions with BLS Blank SkipWinding with RM Radio Monitor Time DSC programmingADA TestCD name specified with NameCDC Name Time Playback timeTo quit the DSC mode and store the set- ting Using SRC of the car radio Switching the CD mode onMIX CD MIX MAGDeleting CD names Entering/displaying CD namesVivaldi DSC CD DispTechnical data Survey of DSC default settingsAppendix Blaupunkt-Werke GmbH