TIM is deactivated (TIM OFF), if the motor antenna is retracted as soon as the set is turned off.
You can now drive through a car wash when the radio is off.
Do not switch on the radio until you have left the car wash.
If the display shows TIM ON when switching off the radio, then the TIM timer is activated. The motor antenna will remain extracted.
If you are sure,
that now and while being in the car wash you are outside the recording period around the adjusted
|
|
| adjusted |
|
|
|
| |
start |
| end | ||||||
|
| 1.5 hours |
|
| 1.5 hours |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
The motor antenna will be extracted
•Switch off the radio and press TIM. The display briefly shows STBY OFF.
The antenna will then remain retracted when the radio is turned off (until the
Attention:
You should by all means deactivate the TIM timer (TIM OFF), if the adjusted re- cording period is soon to start.
For this purpose:
•Press DSC with the radio being activa- ted.
•Use the 
/
rocker button to select the item TIM TIME.
•Press 
/
(you find this item between the time settings for 23:00 and 0:00).
•If you now turn off the radio, the anten- na will be retracted.
You can now drive into the car wash. After you have left the car wash, you may re- activate the TIM function according to your preference.
RT – Radiotext
Radiotext is an RDS feature used by the broadcasters to transmit texts.
The texts can be displayed in two subse- quent lines with a maximum of 64 characters each, which are moved through the display slowly.
Depending on the individual broadcaster, these texts can be of a different nature, for example brief news, program information, commercial broadcasts, etc.
For safety reasons, the radiotext function can only be used if the ignition is switched off.
When activating RT with the ignition being switched on, the message “NO TEXT” will appear in the display.
To read radiotext messages, proceed as follows:
Park the vehicle in a suitable place and turn off the ignition. The radio will be switched off automatically.
•In order to
•Select a station and press RT.
It takes some time until the aired messages are fully available in the system. In the mean- time, the radio will display the message “WAIT”.
Afterwards, the text will be displayed.
If the adjusted station does not provide radio- text information, the message “NO TEXT” is displayed.
To switch off radiotext:
•Press the RT button once again.
DEUTSCH
ENGLISH
PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS
41