Blaupunkt RCM 104 A operating instructions DSC programming, Time, Test, Ada On/Off

Page 21

DSC programming

Using DSC (Direct Software Control), you can adjust certain settings and functions for this car radio to your own liking and then store them.

The basic settings for this audio equipment have been made at the factory. Please refer to the following overview for these settings so that you can always reset to these if desired. If you wish to alter any of the programming,

•press button DSC.

Use the rocker switch and the -dBbutton to make your selection from the following functions and to carry out the desired adjust- ments. The current setting for that function will appear in the display.

 

Select function

Set

Set

value

value

 

Select function

TIME

The current time will be dis-

 

played, or it has to be adju-

 

sted.

 

Use the rocker button << >>

 

to select the hours or minu-

 

tes (flashing), and the /

 

switch to set the time. Start

 

with -dB. The precise time

 

setting is required for the

 

proper operation of TIM.

CDC NAME (only if changer is connec-

 

ted)

 

Use this function to name

 

your discs (see also CD

 

changer control, “Entering/

 

displaying CD names“)

ADA

To switch the ADA system

 

on/off and to test the anten-

 

nas.

Use the <<>> rocker switch to activate one of the follo- wing modes: ADA OFF, ANT 1 X, ANT 2 X, ADA ON X. The “X” stands for a number between 0 and 9, depending on the intensity of the anten- na signal.

Test

If the antenna signal intensi- ty between ANT(enna) 1 and ANT 2 still varies strongly even after having changed the vehicle position (by metres), you should have the antenna furnishing the wea- ker signal checked.

ADA ON/OFF

Normal setting: ADA ON. If only one antenna is con- nected, you should adjust

ADA OFF.

ANGLE Use one of the values -1, 0, or +1 to adapt the individual viewing angle.

Adjust the ANGLE so as to provide the best view.

BAS F=R To distribute the bass level among the front and rear speakers between +6 dB front and +6 dB rear.

TRE F=R To distribute the treble level among the front and rear speakers between +6 dB front and +6 dB rear.

44

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Barcelona RCM 104 a 15 14 Table of contents Switching off Switching onQuick instructions FMTAF Mode DSC ModeCPS AUDTIM/TA 3, 4, 5, 6 preset buttonsScan ? BC Dolby BC NR@ Eject button Press Cassette loading slot To change the seek tuning sensitivi- ty Press loTape side selector MIXInstallation/connection Traffic safetyImportant notes What you really have to readOptical indication of theft protection KeyCardNever try to pull out the KeyCard by force Replacing a KeyCardRDS Radio Data System AF Alternative FrequencyADA on/off antenna test Stereo mono switch FM Adjusting the seek tuning sensi- tivityREG Regional Selecting the wavebandChanging the memory bank FM Preset scanningStoring stations Recalling stored stationsScanning stations with Radio Scan PTY Program TypeProgram types PTY priority Tuning into a station with PTYReception of traffic announcements with RDS-EON Switching the warning beep offEnhanced Other Networks Traffic announcement priority on/offAutomatic seek tuning start Adjusting the traffic message volumeTraffic Memo TIM Adjusting the TIM standby mode/TIM time Setting the time in the DSC menuDeactivating the TIM standby mode Motor antenna could be damaged in a car washDo not switch on the radio until you have left the car wash RT RadiotextIf you are sure Tape operation Tions with BLS Blank Skip Dolby BC NR Listening to the radio during fastWinding with RM Radio Monitor Time DSC programmingADA TestCD name specified with NameCDC Name Time Playback timeTo quit the DSC mode and store the set- ting Using SRC of the car radio Switching the CD mode onMIX CD MIX MAGDeleting CD names Entering/displaying CD namesVivaldi DSC CD DispSurvey of DSC default settings Technical dataAppendix Blaupunkt-Werke GmbH
Top Page Image Contents