![](/images/new-backgrounds/1249464/24946423x1.webp)
Volume
Telephone Audio/Navigation Audio
Muting during telephone mode
If your car sound system is connected with a cell phone or navigation system, "picking" up the phone or a voice output of the navi- gation system automatically mutes the car sound system. The call or the voice output is played back via the loudspeakers of the car sound system. For this purpose, the cell phone or the navigation system must be connected to the car sound system as de- scribed in the installation instructions.
You can find out from your Blaupunkt dealer which navigation systems can be used with your car sound system.
If you answer a call or a navigation an- nouncement takes place, the display shows "PHONE".
Adjusting the volume for telephone audio/navigation audio
During a telephone call or a voice output of the navigation, no traffic announcements are switched through. The traffic announce- ment is not recorded!
You can set the volume level at which the telephone calls or navigation announce- ments are mixed in.
Press the MENU¥OK button 5.
Press the or
button 4repeatedly until "TEL VOL" appears on the display.
Press the button 4 to open the menu.
Set the desired volume with the or
button 4.
When you have finished making your chang- es,
press the ESCAPE button <.
Note:
You can use the volume control 7 to adjust the volume of telephone calls and navigation announcements whilst you are listening to them.
Switching the conÞrmation beep on/off
The system will output a confirmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when assigning a radio station to a station preset button. You can switch the beep on or off.
Press the MENU¥OK button 5.
Press the or
button 4repeatedly until "BEEP ON" or "BEEP OFF" appears on the display.
Switch the BEEP ON or OFF with the or
button 4.
When you have finished making your chang- es,
press the ESCAPE button <.
44