Blaupunkt MP38 installation instructions Adjusting the front/rear volume distribution Fader

Adjusting treble frequency and level

￿Press the AUD button >. "BASS" appears on the display.

￿Press the or button 4repeatedly until "TREBLE" appears on the display.

￿Press the button 4 once to reach the TREBLE submenu.

￿Press the or button 4repeatedly until the desired treble frequency ap- pears on the display.

￿Press the or button 4to adjust the level between -7 and +7.

￿Press the AUD >button twice to exit the menu.

Note:

If an Equaliser preset (POP, ROCK, CLASSIC) is selected, the manual in- crease of the treble level does not re- sult in an audible change starting at a certain setting. For further informa- tion, please read the note in the section entitled "Equaliser presets".

Setting the left/right volume distribution (Balance)

To adjust the left/right volume distribution (balance),

￿press the AUD button >. "BASS" appears on the display.

￿Press the or button 4repeatedly until "BAL" appears on the display with the current setting.

￿Press the or button 4 to adjust the balance (right/left).

￿Press the AUD > button to exit the menu.

Adjusting the front/rear volume distribution (Fader)

To adjust the front/rear volume distribution (fader),

￿press the AUD button >. "BASS" appears on the display.

￿Press the or button 4repeated- ly until "FADER" appears on the display with the current setting.

￿Press the or button 4 to adjust the volume distribution front/rear.

￿Press the AUD > button to exit the menu.