![](/images/new-backgrounds/1249464/24946463x1.webp)
Display
Adjusting the display settings
Adjusting the display brightness
If your car sound system is installed as de- scribed in the installation instructions and your vehicle features the corresponding connection, the display brightness for day and night is switched by switching on the vehicle lighting. The display brightness can be adjusted separately for day and night in increments from 1 - 9.
Press the MENU¥OK button 5.
Press the or
button 4repeatedly until "DIM DAY" or "DIM NIGHT" appears on the display.
Press the button 4 to open the menu.
Press the or
button 4to switch between the brightness levels.
When you have finished making your changes,
press the ESCAPE button <.
Setting the display illumination colour
For the display illumination, you can mix a colour from the RGB spectrum (red green blue) or select a colour during a colour seek.
Mixing a colour for the display illumination
To customise the display illumination to suit your tastes you can mix a colour yourself using the three primary colours red, green and blue.
Press the MENU¥OK button 5.
Press the or
button 4 repeat- edly until "DISP COL" appears on the display.
Press the button 4 to open the menu.
The menu for mixing your own colour is dis- played. "R", "G", and "B" are displayed with the current values. The setting for "R" is ac- tivated.
Press the or
button 4 repeat- edly until the desired colour value is displayed.
Press the or
button 4to move the selection marker to the position after the other colours.
Adjust the other colour components to suit your preferences.
When you have finished making your changes,
press the ESCAPE button <.
Selecting a display illumination during a colour scan
Press the MENU¥OK button 5.
Press the or
button 4 repeat- edly until "COL SCAN" appears on the display.
Press the button 4to start the col- our seek.
The device starts changing the display illu- mination colour.
To select the currently set colour,
press the MENU¥OK button 5. To start the seek tuning again,
press the button 4.
If you found the desired colour,
press the ESCAPE button <.
64