KeyCard theft protection system

This car radio includes one KeyCard as standard equipment, but it can also be op- erated with a second card.

If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer.

If you use 2 KeyCards, the settings stored on the first card will be transferred to the second. However, you can store the follow- ing functions individually for each card:

Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep vol- ume, LOW-EQ, HIGH-EQ.

In addition, the settings which are activated before you switch the radio off, such as the waveband, station, TA priority, AF, REG ON/ OFF, SCANTIME, seek tuning sensitivity, VOL FIX and SHARX will also remained stored.

This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.

Operating the unit

•Turn on the set.

With the KeyCard tongue protruding out of the unit, insert the KeyCard into the slot with the contact area facing up in the middle of the area.

The car radio is now ready for operation.

If a wrong KeyCard is inserted, then “CARD ERR” will appear in the display. In this case please do not make any further adjustments.

The system will switch off by itself after ap- proximately 10 seconds.

If another card type is inserted (e.g. phone or credit card), the display will show “WRONG KC” for approximately 2 seconds.

Remove the wrong card and insert the cor- rect KeyCard.

After the display indications “CARD ERR” or “WRONG KC”:

•Press ON to turn on the set.

Removing the KeyCard

•Pull the KeyCard forward and remove it.

“Training” a second KeyCard/ Replacing a KeyCard

When the unit is operated with the first Key- Card, you can “train” a second one which can also be used with the set.

To “train” a second KeyCard:

•Insert the first KeyCard and turn on the set.

•Press the DSC button and select “LEARN KC” by pressing /.

•Press << or >>.

The display will switch to “CHANGE”.

•Remove the first KeyCard and insert the new one while “CHANGE” still ap- pears in the display.

After the display indication “READY” or “LEARN KC”,

•press DSC.

Now you can also use the new KeyCard to operate your car stereo.

A maximum of 2 cards can be used for the set.

If you attempt to “train” a third one, the ac- cess authorisation for the KeyCard not used for the “training” process will be deleted au- tomatically.

PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH