LEARN KC To “train” a second Key- Card.
Please read the information in the section on “KeyCard theft protection system - “Training” a second Key- Card”.
SHARX Switches the bandwidth in the FM frequency range. When there is a large number of stations within your current reception range, use << >> to switch to SHARX ON which will prevent most interference from adjacent radio stations. This function has been set to “SHARX ON” at the facto- ry.
LED ON Here you can choose be- tween LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra
COLOUR Gradually matches the radio illumination to the dash- board lighting. (green/orange)
BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second.
The volume can be adjusted from between 0 to 9.
(0 = off).
“LO” stands for local recep- tion.
“DX” stands for distant re- ception.
Select “LO 3” if you want to receive strong stations in the local area, select “DX 1” if you want to tune into weaker stations which are further away.
TA VOL To adjust the traffic an- nouncement and warning beep volume from between 0 to 66.
The message will then come through at this volume, if the standard volume is lower.
If the standard volume is set higher than the TA VOL lev- el, then the traffic report will be played at the standard volume.
SCANTIME Use this function to set the scan time for the radio or CD player from 5 to 30 sec- onds.
STEREO/MONO
Switch modes by pressing << >>.
The mode selected will ap- pear briefly in the display. The radio will begin with STEREO playback each time it is switched on.
54