If “AF” is not lit up,
•press AF.
This fulfils the requirements for selecting stations with << >>.
Switching between the memory banks (FM)
You can switch between the memory banks I, II and T in order to store stations and re- call them later.
The currently selected memory bank is in- dicated in the display.
•Press the BND button as many times as necessary until the desired memory bank lights up in the display.
Storing stations
On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks I, II and T.
On MW/LW, you can also store six stations each.
•Select the appropriate waveband by pressing BND.
•Tune in a station with the rocker switch (either automatically 
/
or manually << >>).
•Press the desired preset button until the radio resumes play after the mut- ing (takes approximately 2 seconds, confirmed by a beep).
Now the station has been stored.
The display will indicate which preset but- ton is currently activated.
Note:
Should you attempt to store a station which has already been stored before on another memory bank, the corresponding preset button and the memory bank will flash brief- ly in the display.
Automatically storing the strongest stations with Travel- store
You can automatically store the six most powerful FM stations in your current recep- tion area sorted according to their signal strength. This function is particularly con- venient on longer trips.
•Press the BND button for 2 seconds.
The six strongest FM stations will be auto- matically stored on the memory bank “T” (Travelstore). When this process has been completed, the radio will play the first sta- tion.
If desired, stations can also be stored man- ually in the Travelstore bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station at the touch of a button.
•Select the waveband by pressing BND. For FM, also choose the corre- sponding memory bank by pressing the BND button as many times as nec- essary until the desired bank appears in the display.
•Press the corresponding preset button briefly to recall the station.
Scanning stored stations with Preset Scan
You can briefly scan through all of the stored stations on all wavebands in the selected FM memory bank.
Preset Scan cannot be started unless PTY has been switched off (“PTY” is not lit up in the display).
•If necessary, press PTY.
To start Preset Scan:
•Press SC for approximately 2 seconds.
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
41