Quick reference
1Switching on/off with the buttons: Press one of the buttons illustrated here after you have inserted the Key- Card.
The unit will play at the
Switching on/off with the KeyCard:
The set is switched on or off by insert- ing or removing the KeyCard.
Note:
Be sure to read the information in the section on “KeyCard theft protection system”.
Switching on/off via the ignition:
If the equipment has been connected correspondingly, the set can also be turned on and off with the vehicle igni- tion.
After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.
Switching on when the ignition is switched off:
To keep on operating the set when the ignition is switched off (KeyCard is in- serted), proceed as follows:
Press ON after you hear the double beep tone.
The unit will turn on.
To prevent the battery from going dead, the system will turn off automati- cally after it has played for one hour.
2VOL+ / VOL- Alters the volume.
Each time the set is switched on, it will play at the
You can also change the VOL FIX set- ting (see the section on “DSC pro- gramming”).
3
Instantly mutes the volume.
Press the 
button to mute the volume immediately. “MUTE” will appear in the display.
Cancel the function by pressing button 
or VOL+.
If you press
To programme the mute volume level, proceed as follows:
•Set the desired volume.
•Press 
for 2 seconds until you hear a beep.
Now this volume level is stored as your mute volume.
Extra 
function
Press to store settings made in the DSC menu.
4SC - Scan Radio operation
Scan
Press SC briefly -
“FM SCAN” will alternate with the ab- breviated name of the scanned station in the display. The unit will scan all of the FM stations in the current recep- tion range.
Preset Scan
Preset Scan cannot be started unless PTY has been switched off (“PTY” does not light up in the display). Press SC for approximately 2 seconds until you hear a beep.
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
31