Blaupunkt RDM 126 Scrolling through the broadcast- ing networks only FM, Storing stations

Page 14

Seek tuning

Up Down

Down in short intervals (“AF” must be switched off) Up in short intervals (“AF” must be switched off)

Manual tuning with << >>

You can also tune in a station manually.

Condition:

AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these functions:

Press AF or PTY.

Manual tuning:

Press << >>; the frequency will change in short intervals in downwards or up- wards direction.

When holding the right or left part of the rock- er switch depressed, the frequency scan is speeded up.

Scrolling through the broadcast- ing networks (only FM)

You can use the << >> buttons to tune in stations of your reception area.

If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ...

For this it is necessary that the stations have been tuned in at least once and that “AF” is active (lights up in the display).

For this purpose, you may start Travelstore seek operation:

Press FMT for two seconds; the sys- tem starts to run through the frequency band. The display shows “T-STORE”.

If “AF” does not light up,

press AF.

With this, the requirements for selecting sta- tions with << >> are fulfilled.

Changing the memory bank (FM)

You can shift between the memory banks I,

IIand T in order to store stations and recall them later.

The currently selected memory bank is in- dicated in the display.

Press the FMT button as many times until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1-6for each of the memory banks I, II and T.

On MW/LW, you can store six stations each.

Select the appropriate waveband with FMT or M•L.

Tune in a station with the rocker switch (either automatically / or manually << >>).

Press the desired preset button until the radio resumes play after the mut- ing (takes approximately two seconds, confirmed by beep).

Now the station has been stored.

The activated preset button is indicated in the display.

Notice:

Should you tune in a station which has al- ready been stored before on another mem- ory bank, the corresponding preset button and the memory bank will briefly flash in the display.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

43

Image 14
Contents London RDM 10 11 Contents Quick reference AUD D GEO C DSC Mode B PTY Rocker switchExtra rocker switch functions SC/MIX MIX OFF MIX CDMIX MAG TPMEject @ 1, 2, 3, 4, 5, 6 preset buttons? SRC SRC source CD slotExtra function GEO GEOAUD Extra function AUDImportant notes Replacing a KeyCard KeyCard theft protection systemRemoving the KeyCard Never pull out the KeyCard directlyTurn On Message T.O.M Switching off the flashlightShort Additional Memory S.A.M Optical indication for extra securityRadio operation with RDS Radio Data System Changing the memory bank FM Manual tuning withScrolling through the broadcast- ing networks only FM Storing stationsOff Preset Scan To start Preset ScanTo select a scanned station and switch Changing the scan timeSport Switching from stereo to mono FMProgramme type PTY priority Storing programme typesScanning stations with PTY-SCAN On/off Receiving traffic programme stations with RDS-EONTraffic announcement priority Switching the warning beep off Automatic seek tuning startAdjusting GEO for traffic mes- sages and the warning beep To make a settingWash Programming the TIM standby mode / TIM timesTraffic Memo TIM Mode TIM standby mode while the raDeactivating the TIM standby Recalling stored traffic messagTemporarily interrupting the TIM standby mode Before driving into a car washCD and CDC changer operation optional Selecting CDs and titles Switching to CDC operationSelecting the display mode Storing the display mode Scan operationClearing all CDs from the TPM Entering CD namesClearing a CD from the TPM Clearing a magazine from the TPMClearing TPM information CD names with DSC-UPDATEDeleting a CD name Speech TimerDSC programming CD/CDC NamePTY Lang ColourLED on Learn KCCD/CDC UPD Overview of the DSC factory settingsTo quit the DSC programming mode and store the adjustment AUXTuner SpecificationsAppendix CD playerBosch Gruppe
Related manuals
Manual 29 pages 4.04 Kb