Blaupunkt RDM 126 operating instructions Switching from stereo to mono FM, Programme type, Sport

Page 16
Displaying the selected programme type
• Press << or >>.
The programme type selected last will be displayed briefly.
Selecting a programme type

Switching from stereo to mono (FM)

If reception is poor, you may get better sound quality by switching to mono:

Press the lo button for approximately two seconds.

With mono playback, the stereo sign will disappear from the display.

Each time the radio is switched on, stereo playback is activated.

The unit will automatically switch to mono if the received signal is not strong enough for stereo playback.

PTY – Programme Type

PTY is an RDS service offered by more and

Programme type

Checking the programme type of the

Use << >> to have the last selected pro-

station

• Press PTY for approximately two sec-

gramme type displayed and to choose a new

one.

onds.

You can select any one of the stored types

After the beep tone the display will show the

with the preset buttons 1 - 6.

programme type offered by the tuned in sta-

Condition: PTY must be active.

tion.

Using DSC you can choose between Ger-

If “NO PTY” appears in the display, the cur-

man and English (see “DSC programming - rent station has no PTY code. PTY LANG”).

All of the programme types listed below are available.

The letters printed in bold are identical to the actual short-time indication in the dis- play.

NEWS

CURRENT AFFAIRS

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS

more radio broadcasters. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tun- ing or using the scan function.

Switching PTY on/off

Press PTY.

When the function is active, the programme type selected last will briefly appear in the display. “PTY” will be permanently indicat- ed in the lower right corner of the display panel.

INFORMATION

SPORT

EDUCATE DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC

M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music)

PTY 16 to PTY 30 are not yet assigned.

a)Using the preset buttons

When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory.

Press one of the presets 1 - 6. The selected programme type will be displayed for two seconds.

If you wish to listen to a station with this PTY,

press / to start seek tuning op- eration.

SVENSKA ESPAÑOL PORTUGUÊS

45

Image 16
Contents London RDM 10 11 Contents Quick reference Extra rocker switch functions Rocker switchAUD D GEO C DSC Mode B PTY SC/MIX MIX CD MIX MAGMIX OFF TPM@ 1, 2, 3, 4, 5, 6 preset buttons ? SRC SRC sourceEject CD slotGEO AUDExtra function GEO Extra function AUDImportant notes KeyCard theft protection system Removing the KeyCardReplacing a KeyCard Never pull out the KeyCard directlySwitching off the flashlight Short Additional Memory S.A.MTurn On Message T.O.M Optical indication for extra securityRadio operation with RDS Radio Data System Manual tuning with Scrolling through the broadcast- ing networks only FMChanging the memory bank FM Storing stationsTo start Preset Scan To select a scanned station and switchOff Preset Scan Changing the scan timeProgramme type Switching from stereo to mono FMSport Scanning stations with PTY-SCAN Storing programme typesPTY priority Traffic announcement priority Receiving traffic programme stations with RDS-EONOn/off Automatic seek tuning start Adjusting GEO for traffic mes- sages and the warning beepSwitching the warning beep off To make a settingTraffic Memo TIM Programming the TIM standby mode / TIM timesWash TIM standby mode while the ra Deactivating the TIM standbyMode Recalling stored traffic messagTemporarily interrupting the TIM standby mode Before driving into a car washCD and CDC changer operation optional Selecting the display mode Switching to CDC operationSelecting CDs and titles Storing the display mode Scan operationEntering CD names Clearing a CD from the TPMClearing all CDs from the TPM Clearing a magazine from the TPMDeleting a CD name CD names with DSC-UPDATEClearing TPM information Timer DSC programmingSpeech CD/CDC NameColour LED onPTY Lang Learn KCOverview of the DSC factory settings To quit the DSC programming mode and store the adjustmentCD/CDC UPD AUXSpecifications AppendixTuner CD playerBosch Gruppe
Related manuals
Manual 29 pages 4.04 Kb