Blaupunkt RDM 126 operating instructions Quick reference

Page 4

Quick reference

1Switching on/off with the ON button: Press ON.

When switching the set on with the ON button, the KeyCard has to be insert- ed. The unit will play with the pre-ad- justed volume.

Switching on/off with the KeyCard: The set has to be turned on via the ON button.

Note:

Read the information in chapter “Key- Card theft protection system”.

Switching on/off via the ignition:

When connected correspondingly, the set can also be turned on and off via the vehicle ignition.

After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.

Switching on with the ignition being switched off:

To keep on operating the set when the ignition is switched off (KeyCard is in- serted), proceed as follows:

Press ON after the double beep tone. The unit will be turned on.

To avoid that the battery goes flat, the system will be turned off automatically after a playback time of one hour.

2VOL+ / VOL-

To alter the volume.

Each time the set is switched on, it will play with the pre-adjusted volume (VOL FIX).

You may also change the VOL FIX set- ting (see chapter “DSC programming”).

3

For instantly muting the volume.

By pressing the button the volume will be muted immediately. “MUTE” will appear in the display.

The function is cancelled by pressing button or VOL+.

When pressing VOL-, the normal vol- ume will be by one grade lower than the mute volume.

To programme the mute volume level,

 

DEUTSCH

 

 

proceed as follows:

 

 

• Adjust the desired volume.

 

 

 

ENGLISH

Now this volume level is stored as your

• Press

for two seconds until you

 

hear a beep.

 

mute volume.

 

 

Extra function

FRANÇAIS

 

Memory button in the DSC menu.

 

4 FMT

 

 

 

 

 

 

 

 

ITALIANO

Press repeatedly to switch between

 

the FM memory banks I, II and T

 

(Travelstore).

 

When pressing this button, the system

 

NEDERLANDS

will automatically switch to FM.

 

Extra function FMT

 

To store the six most powerful stations

 

 

 

automatically with Travelstore:

SVENSKA

Press FMT until you hear a beep or

 

“T-STORE” appears in the display. The

 

storage process is finished when “T-

 

 

STORE” disappears from the display.

ESPAÑOL

5 M•L - toggle switch

 

To toggle between medium and long

 

wave reception.

 

PORTUGUÊS

 

 

 

 

 

 

 

33

Image 4
Contents London RDM 10 11 Contents Quick reference Extra rocker switch functions Rocker switchAUD D GEO C DSC Mode B PTY SC/MIX MIX CD MIX MAGMIX OFF TPM@ 1, 2, 3, 4, 5, 6 preset buttons ? SRC SRC sourceEject CD slotGEO AUDExtra function GEO Extra function AUDImportant notes KeyCard theft protection system Removing the KeyCardReplacing a KeyCard Never pull out the KeyCard directlySwitching off the flashlight Short Additional Memory S.A.MTurn On Message T.O.M Optical indication for extra securityRadio operation with RDS Radio Data System Manual tuning with Scrolling through the broadcast- ing networks only FMChanging the memory bank FM Storing stationsTo start Preset Scan To select a scanned station and switchOff Preset Scan Changing the scan timeProgramme type Switching from stereo to mono FMSport Scanning stations with PTY-SCAN Storing programme typesPTY priority Traffic announcement priority Receiving traffic programme stations with RDS-EONOn/off Automatic seek tuning start Adjusting GEO for traffic mes- sages and the warning beepSwitching the warning beep off To make a settingTraffic Memo TIM Programming the TIM standby mode / TIM timesWash TIM standby mode while the ra Deactivating the TIM standbyMode Recalling stored traffic messagTemporarily interrupting the TIM standby mode Before driving into a car washCD and CDC changer operation optional Selecting the display mode Switching to CDC operationSelecting CDs and titles Storing the display mode Scan operationEntering CD names Clearing a CD from the TPMClearing all CDs from the TPM Clearing a magazine from the TPMDeleting a CD name CD names with DSC-UPDATEClearing TPM information Timer DSC programmingSpeech CD/CDC NameColour LED onPTY Lang Learn KCOverview of the DSC factory settings To quit the DSC programming mode and store the adjustmentCD/CDC UPD AUXSpecifications AppendixTuner CD playerBosch Gruppe
Related manuals
Manual 29 pages 4.04 Kb