Blaupunkt RCR 87 Recalling stored stations, Scanning stored stations with Preset Scan, Tivity

Notice:

Should you tune in a station which has al- ready been stored before, then the corre- sponding preset position will briefly flash in the display.

Automatically storing the strongest stations with Travel- store

You can automatically store the five most powerful FM stations of your current recep- tion area sorted according to their signal strength. This function is particularly conven- ient on longer trips.

•Press the TS/FM or TS/BND button for 1 sec.

“T-STORE” will appear in the display.

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the memory bank with TS/FM or TS/BND.

•Press the corresponding preset button briefly to recall the station.

Scanning stored stations with Preset Scan

You can have all of the stored stations briefly scanned.

To start Preset Scan:

•Press SCA/SRC for approximately

1 sec. until “SCAN” appears in the dis- play.

Selecting the seek tuning sensi-	DEUTSCH
tivity
You can alter the automatic seek tuning	ENGLISH
sensitivity.
If “lo” is displayed, the radio will only pick up
strong, local stations.
If “lo” does not light up, the radio will also
pick up weaker, distant stations.
Should you wish to alter the seek tuning
sensitivity, refer to chapter “DSC program- FRANÇAIS
ming – LO/DX”.
	ITALIANO
Stereo - mono switching
The radio will only play in stereo if the ster-
eo quality of the received station signal is	NEDERLANDS
sufficient. When the signal strength gets
poor, the radio will gradually switch to mono.

The five strongest FM stations will be auto-	All of the stored stations to be received in
matically stored on the memory bank “T”	the selected waveband will be scanned one
(Travelstore). When this process has been	after the other. On FM, the radio will either
completed, the radio will play the first sta-	scan the stations stored on memory bank I
tion stored on preset 1.	and II or T.

If desired, stations can also be stored man-	To select a scanned station and switch
ually on the Travelstore bank (see “Storing off Preset Scan:
stations”).	• Press SCA/SRC for about 1 second.
	Note:
	If “TA” shows on the display panel, the sys-
	tem will scan the stored traffic stations only.

You can select between stereo or mono
sound in the DSC menu.
For more information, refer to chapter “DSC	SVENSKA
programming – STEREO/MONO”.
Each time the radio is switched on, stereo
sound is activated automatically.
	ESPAÑOL
	PORTUGUÊS

29