Blaupunkt RCR 127, RCR 87 Stereo/Mono, To quit the DSC programming mode and store the adjustment

LEARN KC To “train” a second Key- Card.

Please read the information in chapter “KeyCard theft protection system - Training a second KeyCard”.

volume adjusted for the pro- gram is lower.

If the program volume is higher than the TA VOL lev- el, the traffic report will be played slightly louder.

LO/DX To adjust the seek tuning sensitivity for local or distant stations.

LO - local stations

LO 1 - high sensitivity

LO 3 - normal sensitivity

LED ON/OFF You can choose between LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra anti-theft protection when the unit has been switched off and the KeyCard re- moved.

BEEP Acknowledgement tone for all functions which require a button to be pressed for more than 1 second.

The volume can be adjusted from between 0 to 9.

(0 = off)

TA VOL To adjust the traffic an- nouncement and beep tone volume from between 0 to 63.

The message will then come through at this volume, if the

LOUDNESS When listening at a low lev- el, the Loudness function creates a more natural sound by boosting the low frequency range.

LOUD 1 - Low boost LOUD 6 - Max. boost

STEREO/MONO

You can select between stereo or mono sound.

AM ON/OFF (Verona RCR 127)

You can deactivate one or both AM bands (MW/LW) in order to reduce the number of bands for selection with TS/BND.

selectable:

AM ON – all bands

MW OFF – LW, FM

LW OFF – MW, FM

AM OFF – FM

DX - distant stations DX 1 - high sensitivity DX 3 - normal sensitivity

You can select separate sen- sitivity levels for AM and FM.

To quit the DSC programming mode and store the adjustment:

•Press DSC.

The DSC programming mode will be auto- matically quit 8 seconds after having made the last adjustment.