Blaupunkt RCR 87, RCR 127 operating instructions KeyCard theft protection system

KeyCard theft protection system

This piece of equipment is supplied with one	The system will switch off after approximate-	• Push in the KeyCard. The card is re-
KeyCard, though you can also operate the	ly 10 seconds.	leased and put in the proper position
set with a second KeyCard.	When inserting another card type (e.g.	for being removed.
If you have lost your KeyCard or if it was	phone or credit card), the display will show	• Remove the first KeyCard and insert
damaged, you can buy a second / extra card	“WRONG KC” for approximately 2 seconds.
		the new one.
from your specialised dealer.	The set will switch off automatically.
		After the display indication “READY” or
When using a second KeyCard, the settings	Remove the wrong card and introduce the
		“LEARN KC”,
stored on the first card will be adopted. How-	correct KeyCard.
		• press DSC.
ever, you can individually store the follow-	• Turn the knob to switch on the set.
		Now you can also use the new KeyCard for
ing functions:
		operating your unit.
Bass, treble, balance and fader settings,	Removing the KeyCard
		A maximum of two cards can be used for
Loudness, TA (traffic announcement vol-
		the set.
ume), beep volume, lo or dx.	Never pull out the KeyCard directly!
		When trying to “train” a third one, the ac-
In addition, the settings activated before	• First, slightly push in the KeyCard.
		cess authorisation for the KeyCard not used
switching the radio off, such as the station	This releases the card and puts it in the prop-
		for the “training” process will be deleted au-
tuned in, TA priority, AF, AM ON/OFF and
	er position for being removed.
		tomatically.
RM ON/OFF will also remain stored.
	• Now you can pull it out.
This ensures that you will find your basic
		Displaying the radio pass data
settings re-adjusted automatically as soon	“Training” a second KeyCard/
as you have inserted your KeyCard.		Using the KeyCard supplied with your set
	Replacing a KeyCard
Putting the unit into operation	While operating the unit with the first Key-	you can have the radio pass data such as
		the model name, product number (7 6..) and
• Turn on the set.	Card, you can “train” a second one to be serial number indicated on the display pan-
	also used with the set:	el.
With the KeyCard tongue sticking out,
	• Insert the first KeyCard and turn on the	Please refer to chapter “DSC programming
introduce the KeyCard into the slot
	set.	- READ KC”.
with the contact area showing up.
	• Press the DSC button and select
The car radio is now ready for operation.
	“LEARN KC” with / .
If a wrong KeyCard is inserted, then “CARD
ERR” followed by “WAIT” will appear in the	• Press << or >>.
display. In this case please do not make any	The display will switch to “CHANGE”.
further adjustments.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

25